Fendereliminators.net Fender Kit w/Lights

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Fendereliminators.net Fender Kit w/Lights

Printable Version

CBR >> This 'n' That >> Product Reviews >> Fendereliminators.net Fender Kit w/Lights

Page: [1] 2 next > >>

Message

<< Older Topic Newer Topic >>

Fendereliminators.net Fender Kit w/Lights - 8/31/2005 10:04:02 PM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

I haven't seen this one posted here and I am very happy with it so I thought I would let everyone know about it. The kit is from www.fendereliminators.net They can also be found on Ebay. The kit I bought for my 600RR included two LED turnsignals and an LED map light to keep the cops away and make it all DOT legal. The kit was $89.95 plus shipping. It is much less than the Competition Werks one and includes the lights which makes it that much better. The kit was very easy to install and is made of some high quality materials. There is no problem with it even getting close to the rear wheel. The instructions tell you how to hook the wires up and they make it very easy. Each bracket is nicely bended and molded to fit just right. Kit includes everything you need. They sell kits for many makes and models of bikes also. You can get the kit without turn signals if you would like also. They do sell flush mounted front turn signals also that are LED and have the correct wiring to make them work with the stock wiring. They are much cheaper than other ones also. I talked to Oliver from the company and he said if you mention my name(Josh Olsen) he will get you a deal on the cost of the kit. I thought it was a great kit at a great price. Give it a look. Here are pics of it installed on my bike:

Thumbnail Image

Thumbnail Image

Attachment (2)

Post #: 1

RE: Fendereliminators.net Fender Kit w/Lights - 8/31/2005 10:04:29 PM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

Two more pics:

Thumbnail Image

Thumbnail Image

Attachment (2)

(in reply to josho66)

Post #: 2

RE: Fendereliminators.net Fender Kit w/Lights - 9/1/2005 12:09:06 AM

MgA_ODEN

2005 Ride Of
The Year
Posts: 2054
Joined: 4/19/2005
From: Spring , Tx
Status: offline

Great review , you have great taste also

_____________________________

Black 2004 CBR1000RR

(in reply to josho66)

Post #: 3

RE: Fendereliminators.net Fender Kit w/Lights - 9/2/2005 9:19:32 AM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

quote:

ORIGINAL: MgA_ODEN

Great review , you have great taste also

That's a nice ass!!!! Thanks. I really like the fender kit. Cheaper than others and really is nice with the lights. They put a lot of time into making the kit.

(in reply to MgA_ODEN)

Post #: 4

RE: Fendereliminators.net Fender Kit w/Lights - 10/12/2005 5:02:46 PM

fasteddie

Posts: 15
Joined: 9/29/2005
Status: offline

hey bro whats up man. yea i just ordered the SS kit from fendereliminators.net with just the tag LED light cause I also ordered the clear alternatives integrated LED tail light. and I got a HALO kit. Did u look at it there on the site? it comes with a on/offf switch and doesn't **** with ur stock head lights....well man I to hear that u decided on getting the HALO kit....peace "Fast Eddie" "Set Em' Up"...

(in reply to josho66)

Post #: 5

RE: Fendereliminators.net Fender Kit w/Lights - 10/12/2005 8:33:47 PM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

quote:

ORIGINAL: fasteddie

hey bro whats up man. yea i just ordered the SS kit from fendereliminators.net with just the tag LED light cause I also ordered the clear alternatives integrated LED tail light. and I got a HALO kit. Did u look at it there on the site? it comes with a on/offf switch and doesn't **** with ur stock head lights....well man I to hear that u decided on getting the HALO kit....peace "Fast Eddie" "Set Em' Up"...

You will have to post about the halo kit when you get it. I was looking at that but didn't know how it would install. I would like to know how hard the install is and how good it looks.

(in reply to fasteddie)

Post #: 6

RE: Fendereliminators.net Fender Kit w/Lights - 10/13/2005 1:57:43 PM

SynTeg

Posts: 18
Joined: 9/14/2005
From: Las Vegas, NV
Status: offline

How come on the site it says the price is 139.99 for the SS kit?

_____________________________

2005 Honda CBR600RR
Stock as F*ck

(in reply to josho66)

Post #: 7

RE: Fendereliminators.net Fender Kit w/Lights - 10/14/2005 7:23:03 PM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

quote:

ORIGINAL: SynTeg

How come on the site it says the price is 139.99 for the SS kit?

Check out Ebay. They sell the kits on there also and you can get them a little cheaper. The SS kit is more than the standard kit also. I have the standard which doesn't have a metal license plate bracket. When I got mine for my '05 600RR they only had the normal one which I really like. If you talk to Oliver he will get you a deal also.

(in reply to SynTeg)

Post #: 8

RE: Fendereliminators.net Fender Kit w/Lights - 10/15/2005 12:33:44 PM

TeeDub

Posts: 125
Joined: 9/24/2005
Status: offline

Funny, I just installed this kit and was going to review it, then saw this one. I didn't think the quality of the kit was very good. The left side bracket was different than the right side and the holes weren't drilled in the same place, so it made the plate crooked. I had to drill new holes to make it align properly. Also, one of the leds on the plate light was flickering and completely went out after about two minutes of use, so only two of the three plate leds work. Seems unacceptable for a $140 piece of plastic.

On another note, how did you guys run all those wires and the resistors to look so clean? Did you just have to chop them really short? Mine has a big-ass clump of wires now wire tied behind the eliminator.

_____________________________

Just another day with the parasites.

(in reply to josho66)

Post #: 9

RE: Fendereliminators.net Fender Kit w/Lights - 10/15/2005 2:54:22 PM

MgA_ODEN

2005 Ride Of
The Year
Posts: 2054
Joined: 4/19/2005
From: Spring , Tx
Status: offline

quote:

ORIGINAL: TeeDub

Funny, I just installed this kit and was going to review it, then saw this one. I didn't think the quality of the kit was very good. The left side bracket was different than the right side and the holes weren't drilled in the same place, so it made the plate crooked. I had to drill new holes to make it align properly. Also, one of the leds on the plate light was flickering and completely went out after about two minutes of use, so only two of the three plate leds work. Seems unacceptable for a $140 piece of plastic.

On another note, how did you guys run all those wires and the resistors to look so clean? Did you just have to chop them really short? Mine has a big-ass clump of wires now wire tied behind the eliminator.

A . call them up and tell them about your light , they will replace it for free.
B. if you want clean and control use a Libertek FlasherRelay

_____________________________

Black 2004 CBR1000RR

(in reply to TeeDub)

Post #: 10

RE: Fendereliminators.net Fender Kit w/Lights - 10/17/2005 9:14:53 PM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

quote:

ORIGINAL: MgA_ODEN

quote:

ORIGINAL: TeeDub

Funny, I just installed this kit and was going to review it, then saw this one. I didn't think the quality of the kit was very good. The left side bracket was different than the right side and the holes weren't drilled in the same place, so it made the plate crooked. I had to drill new holes to make it align properly. Also, one of the leds on the plate light was flickering and completely went out after about two minutes of use, so only two of the three plate leds work. Seems unacceptable for a $140 piece of plastic.

On another note, how did you guys run all those wires and the resistors to look so clean? Did you just have to chop them really short? Mine has a big-ass clump of wires now wire tied behind the eliminator.

A . call them up and tell them about your light , they will replace it for free.
B. if you want clean and control use a Libertek FlasherRelay

Very true. They should have no problem with the light. My brackets fit just fine with no problems. You may want to ask them about them also. As for the wiring I just got the wires as short as I could. I then wrapped the excess in black electrical tape, so it blended in with the black bracket and then zip tied them tightly up there. The first time I did it there was a big ball, then I redid it and it worked a lot better. Give them a call, they are very good about fixing things that aren't right. I have seen a lot of people that have bought from them with no problems. Unfortunatly like all things you may occasionally get a bad one.

(in reply to MgA_ODEN)

Post #: 11

RE: Fendereliminators.net Fender Kit w/Lights - 10/18/2005 1:26:53 PM

TeeDub

Posts: 125
Joined: 9/24/2005
Status: offline

The plate light seems to be working now, must be a short in the led. I emailed them and they asked me to call them, which I did today but got no answer. I'll try again later. I did re-wire mine too, using heat shrink on the wires, I also drilled a couple of holes where you can't see them on the fender kit and zip-tied the resistors up under there to hide them.

_____________________________

Just another day with the parasites.

(in reply to josho66)

Post #: 12

RE: Fendereliminators.net Fender Kit w/Lights - 10/19/2005 8:28:00 AM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

quote:

ORIGINAL: TeeDub

The plate light seems to be working now, must be a short in the led. I emailed them and they asked me to call them, which I did today but got no answer. I'll try again later. I did re-wire mine too, using heat shrink on the wires, I also drilled a couple of holes where you can't see them on the fender kit and zip-tied the resistors up under there to hide them.

I didn't have any resistors for my fender eliminator kit. I just had to wire the leds to the stock wiring and everything worked just fine. The kit didn't come with any. Maybe that is why my kit doesn't have so much wires.

(in reply to TeeDub)

Post #: 13

RE: Fendereliminators.net Fender Kit w/Lights - 10/20/2005 6:54:01 PM

TeeDub

Posts: 125
Joined: 9/24/2005
Status: offline

Now two of the plate leds are out. I emailed them and Oliver replied telling me to call them. I've tried to call them about six times this week and it just rings and rings.

_____________________________

Just another day with the parasites.

(in reply to josho66)

Post #: 14

RE: Fendereliminators.net Fender Kit w/Lights - 10/21/2005 8:30:55 AM

josho66

Posts: 2040
Joined: 7/7/2005
Status: offline

quote:

ORIGINAL: TeeDub

Now two of the plate leds are out. I emailed them and Oliver replied telling me to call them. I've tried to call them about six times this week and it just rings and rings.

That suprises me. I emailed them about ordering something and they are a little slow for some reason. I think they have been around awhile so I imagine they didn't up and close or anything. They must be busy or something. Hopefully it works out for you.

(in reply to TeeDub)

Post #: 15