Winter upgrades
Login | |
|
|
|
|
|
RE: Winter upgrades - 2/2/2007 3:10:21 PM
|
|
|
mdfirefighter
 Posts: 658
Joined: 9/11/2005 From: Huntingtown, MD (USA) Status: offline
|
So what exactly did you upgrade? Give us some deets. MDFF
_____________________________
"This is gold one to gold two and three, split up, take them one on one." - Tron
|
|
|
|
RE: Winter upgrades - 2/2/2007 9:36:21 PM
|
|
|
ClutchBurningRacing
Posts: 101
Joined: 7/25/2006 Status: offline
|
Still waiting for donations to complete the T05/TO6 turbo upgrade with 50mm Tail waste gate, AMS1000 multistage boost controller, installed the multi-stage lockup clutch, new billet clutch basket, removed the internal balancers, welded up the oil passages, new bearings and rings, head gasket. May have to wait awhile on the data logger and stand alone ecu, my rich uncle hasn't died yet and my suger momma left me! Still waiting on the bracket from Jaws to remove the plunger off the front brake and replace the stock lines with steal braid. Waiting on the control valve and dial to convert the air shifter over to CO2. Had my forks sent out to be cut down two inches, got em back and all of the fluid drained out of one during shipping so I sent them back again! Looking for an aftermarket light weight rear wheel, having a hard time locating anything. I may have to stoop down and put a Busa wheel on it. Oh yeah, I ground down all the welds, hacked off anything that wasn't needed and shaved or drilled out every solid piece I could find. It weighed about 715lbs with a full tank of gas and me suited up last year. I hope to have lost at least 10 lbs. Still working on a few things, but time is getting short!! I had a best of 298 hp at the wheel last year, and if I get everything done this year I hope to be around 415 to 425.
|
|
|
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Archive |
Honda CBR Motorcycle Links |
Legal |
Privacy Policy |
© CBR Forum
CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.
|