HID Installation (for older style HID kits)

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

HID Installation (for older style HID kits)

Printable Version

CBR Forum >> General >> How-To... >> HID Installation (for older style HID kits)

Page: [1] 2 3 4 5 next > >>

Message

<< Older Topic Newer Topic >>

HID Installation (for older style HID kits) - 2/11/2007 4:43:24 AM

Blue Fox

Posts: 4218
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline

NEW UPDATED HID WRITE-UP HERE:

http://www.cbrforum.com/m_379249/tm.htm

-------------------------------------------------------------------------------------------------------------------------------------------

UPDATE: (Feb 27, 2007): Rewire of ballasts & Wire cleanup: See bottom of this post for update.

UPDATE: (Feb 22, 2007): Alternate Igniter Placement: See bottom of this post for update.

Original Post:

This is a write-up for an HID conversion with generic HID kits that consist of a large ballast, large igniter and HID bulb itself for a 2006 600RR. The kit that I used was bought off of an eBay store for 119.99. Yes, it’s VERY generic, but it works, and for 119 bucks, it looks and performs great!

So I can put this to bed….YES…..ANY H7 HID kit will work on our bikes. Cars that use H7’s have the EXACT SAME bulbs as we do in our bikes, so as long as you order and H7 HID kit, it’ll work regardless.

I bought the 10000k HID kit. They are very blue in apperance and have a slightly purple tint to them. (a lot like a BMW M5 or Mazda RX8 wth HIDs). The light output on the road looks like a white LED. Very white with a very SLIGHT hint of blue. They look great, and are very bright. If you want more of a true white, get the 6000k or 8000k. If I was going to buy again, I would probably go with the 8000k's. Just my opinion though.

Now, for the installation......

To start off, you are going to need automotive grade wire. I believe I used 16 gauge “primary” wire. It comes in a 30 ft. package, and you can usually buy it at any automotive store (I bought all of my stuff at Checkers). It’s roughly about 5.00 per package, and I bought a red, white and black one (which I’ll explain why in a later on.)

Now, in the picture above, notice how I kept my workspace in anal-like organized manner. This will really help when you are putting your bike back together. Keeping it clean will just make the whole thing go smoother, trust me.

As in the picture, I have the following supplies…..
- Wire strippers
- 16-gauge automotive wire
- Fuel-line hosing
- Hex wrench that came with the bike
- Flat head screw driver
- Butt-splice connectors
- Permanent Marker
- Masking tape

Now, here is how I went about mounting my ballasts. In the generic kits, they are huge when they are compared to the newer smaller ones. So, there isn’t really a place up front to mount them, so I decided to relocate them to under the rear seat. They “just fit” into the nooks on the sides. Plus, this keeps them out of weather (even though they’re water-resistant.)

Also, I didn’t want to take any of my fairings off, so this whole installation was done WITHOUT taking off any fairings with the exception of that triangular piece right below the seat on the left side of the bike, and in a minute, you’ll know why. But if you did take off the fairings, it would go by a little easier.

To start, take off your seats. To take off the main seat, fold back the rear corners of the seat to reveal the bolts holding them down. There should be two at the back. Take these out, put them in your “anally-organized workspace”. Label them with the masking tape (this helps later on, TRUST ME!)

Once you have the seat off, you’ll need to take off that triangular piece right below the seat on the right side. It uses poppers, so you can just pull it off, though I think there is one of those plastic anchors holding the end of it to the rear-seat cowl, so you’ll need to take that out too. You will now notice that the bikes main wiring harness routes itself right through this area, and that’s where we’ll route our “extended” wiring harnesses too.

First thing is to put the bulbs in. Th

< Message edited by Blue Fox -- 9/4/2007 9:25:53 PM >

_____________________________

Post #: 1

RE: HID INSTALLATION (extremely detailed) - 2/11/2007 2:19:49 PM

vpsophmore

Posts: 4094
Joined: 8/10/2006
Status: offline

awesome write up...how long did it take you to do the whole thing? I've got a kit I still need to put in but I don't have a garage so it'll have to be a one day thing.

< Message edited by vpsophmore -- 2/11/2007 2:20:15 PM >

_____________________________

(in reply to Blue Fox)

Post #: 2

RE: HID INSTALLATION (extremely detailed) - 2/11/2007 8:42:39 PM

Blue Fox

Posts: 4218
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline

1 day is MORE than enough to get this project done. Total, I spent about 5 hours on it. But most of that time was wasted by trying to find out what I need to do, how the HID's worked, how to route them, why the bulbs didn't fit, etc, etc. If you follow the tips in my write-up, you should be able to get it done in no more than a couple hours.

_____________________________

(in reply to vpsophmore)

Post #: 3

RE: HID INSTALLATION (extremely detailed) - 2/11/2007 9:42:48 PM

D2DGraphix_600RR

Posts: 4673
Joined: 7/13/2006
From: Menominee, MI to Panama City Bch,FL / Orlando,FL
Status: offline

LOVE the 10k look. Awesome write up1 Now you got me thinking, haha

_____________________________

ZG Windscreen, Hotbodies Fronts, LED Pegs, Custom Seats & Cowl, Yosh RS-5

WTF is up with the grammar?!?

http://www.myspace.com/d2meclipsegt_600rr

(in reply to Blue Fox)

Post #: 4

RE: HID INSTALLATION (extremely detailed) - 2/11/2007 11:01:04 PM

HAVOC

Posts: 3938
Joined: 6/27/2006
Status: online

very thorough write up ..

< Message edited by havoc_on_2_wheels -- 2/11/2007 11:02:05 PM >

_____________________________

(in reply to D2DGraphix_600RR)

Post #: 5

RE: HID INSTALLATION (extremely detailed) - 2/11/2007 11:12:46 PM

dragonium25

Posts: 1107
Joined: 4/12/2006
Status: offline

"I see Blue...he looks glorious"

_____________________________

"To defeat the dragon within, you must defeat the dragon without"

'05 600RR Black/Tribal
Framesliders
Scorpio i500 alarm
Puig DB smoke
CA tail light
8000K HIDs
Custom FE & Meshing
Watsen Design LEDs
2Bros M2 slip-on
PCIIIUSB

(in reply to HAVOC)

Post #: 6

RE: HID INSTALLATION (extremely detailed) - 2/13/2007 11:21:43 AM

Evan

Posts: 258
Joined: 11/14/2006
Status: offline

Nice write up. I've installed the hid's on several cars and my bike. I never even though of using heater hose or fuel line for a loom. Nice thinking!

_____________________________

(in reply to dragonium25)

Post #: 7

RE: HID INSTALLATION (extremely detailed) - 2/14/2007 9:51:16 PM

Blue Fox

Posts: 4218
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline

quote:

ORIGINAL: Evan

Nice write up. I've installed the hid's on several cars and my bike. I never even though of using heater hose or fuel line for a loom. Nice thinking!

Thanks. I figured that I was routing the wiring almost direcly over the engine, so I needed something that would put up with the heat, and fuel line does just that. Plus, it really makes for a clean and professional looking installation (with the exception of me mounting the igniter's up front). I recently reloated them to behind the front fairings, which looks GREAT now. I'll post pics when I get a chance.....along with an updated write up of how to do that.

_____________________________

(in reply to Evan)

Post #: 8

RE: HID INSTALLATION (extremely detailed) - 2/21/2007 5:00:52 PM

Klassh

Posts: 9
Joined: 1/12/2007
Status: offline

I agree about the fuel line hose. I wonder if electrical shrink tubbing would work for the smaller lines. (Even though most of us are getting pretty proficient with the gift from the gods that is electrical tape)

Where is our update :-(

(in reply to Blue Fox)

Post #: 9

RE: HID INSTALLATION (extremely detailed) - 2/21/2007 10:09:36 PM

ChrisMcD

Posts: 1470
Joined: 3/27/2005
Status: offline

Nice write up.....good job looks great!!

_____________________________

2000 CBR 600F4 (*See Picture)
Musichyp/
~Chris
Portland, Me

(in reply to Klassh)

Post #: 10

RE: HID INSTALLATION (extremely detailed) - 2/22/2007 5:27:01 AM

Blue Fox

Posts: 4218
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline

quote:

ORIGINAL: Klassh

I agree about the fuel line hose. I wonder if electrical shrink tubbing would work for the smaller lines. (Even though most of us are getting pretty proficient with the gift from the gods that is electrical tape)

Where is our update :-(

Funny you ask about the update.......because I just updated.

Check it out, made a HUGE difference in the amount of "mess" the old setup made.

_____________________________

(in reply to Klassh)

Post #: 11

RE: HID INSTALLATION (extremely detailed) - 2/22/2007 8:13:17 PM

jasonb

Posts: 465
Joined: 7/7/2006
From: Greenwich, CT
Status: offline

how much did you get those hid kit for?
And what k are they 10000?

_____________________________

Silence.

(in reply to Blue Fox)

Post #: 12

RE: HID INSTALLATION (extremely detailed) - 2/23/2007 12:59:04 AM

dragonium25

Posts: 1107
Joined: 4/12/2006
Status: offline

quote:

ORIGINAL: jasonb

how much did you get those hid kit for?
And what k are they 10000?

How 'bout reading the first 3 paragraphs of the post...

_____________________________

"To defeat the dragon within, you must defeat the dragon without"

'05 600RR Black/Tribal
Framesliders
Scorpio i500 alarm
Puig DB smoke
CA tail light
8000K HIDs
Custom FE & Meshing
Watsen Design LEDs
2Bros M2 slip-on
PCIIIUSB

(in reply to jasonb)

Post #: 13

RE: HID INSTALLATION (extremely detailed) - 2/25/2007 1:44:55 AM

ddaren

Posts: 332
Joined: 9/21/2006
Status: offline

Personally, I think HID's are HID's no matter what brand... as long as they work and look good. However, different brands have different colors at the certain color temperature (like how clothes are... buying a medium ecko shirt is like an extra large in others).

My friend and I have a pretty well known brand (McCulloch) at 6000K, pretty white with a hint of blue. My other friend has a generic brand for a lot cheaper at 6000K and it looks very very deep blue. In my opinion, both look good, but I'm the shallow type of guy to go more expensive for the brand name. LoL.

So for those who wonder about Ebay generid HID's, go for it... just make sure the seller is trustable.

(in reply to dragonium25)

Post #: 14

RE: HID INSTALLATION (extremely detailed) - 2/26/2007 1:18:40 PM

soonster

Posts: 11
Joined: 2/22/2007
Status: offline

Hey BlueFox, great write up. I'm planning on upgrading my 2003 CBR 600RR headlights to hid. Wonder if you can provide some additional info regarding the low beam pattern (if possible, some night shots of the low vs high beam from the rider's position). Any info is greatly appreciated. Since I ride mostly in the city, dont really want the light pattern to scatter to high.

Thanks,
Soonster

(in reply to ddaren)

Post #: 15