Will F4I Calipers fit a 2000?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Will F4I Calipers fit a 2000?

Printable Version

CBR Forum >> Past CBR Models >> CBR 600F4 >> Will F4I Calipers fit a 2000?

Page: [1]

Message

<< Older Topic Newer Topic >>

Will F4I Calipers fit a 2000? - 9/9/2005 11:36:23 PM

90mustang

Posts: 23
Joined: 8/6/2005
Status: offline

Just as title says. I have a 2000 Cbr 600 and i was wondering if F4i (from a 2003) Calipers would fit?

Post #: 1

RE: Will F4I Calipers fit a 2000? - 9/10/2005 12:59:46 AM

yellerf4

Posts: 35
Joined: 7/9/2005
Status: offline

prob not...the only thing that fits is the subframe....and thats about all nothing else matches up

(in reply to 90mustang)

Post #: 2

RE: Will F4I Calipers fit a 2000? - 10/12/2005 8:45:43 AM

thebird_19

Posts: 28
Joined: 10/8/2004
Status: offline

I think they will. My brothers 99 f4 brakes look almost identical to my 01 f4i brakes. The part #'s on bikebandit are the same for the rear caliper but different for the front. I still think they will work though, because they mount the same and look the same. There are a lot of parts that are interchangeable between the two bikes, not just the subframe, but I'd check several forums to see if anyone has used them on theres.

_____________________________

David D. '01 CBR F4i

(in reply to yellerf4)

Post #: 3

RE: Will F4I Calipers fit a 2000? - 10/13/2005 12:42:45 PM

1badf4

Posts: 73
Joined: 9/20/2005
Status: offline

Link Here

They appear to be the same. A lot of the parts between the two bikes are interchangeable. I am not sure where yeller got his info.

Check www.ronayers.com and look at the online microfiche. It is a great source of information.

(in reply to thebird_19)

Post #: 4

RE: Will F4I Calipers fit a 2000? - 12/26/2005 3:47:12 AM

testpilotb

Posts: 58
Joined: 10/30/2005
Status: offline

Actually the bolt patterns are different between the F4 and F41 rotors. An F4i wheel with rotors will work with the 2000 bike but the rotors wont bolt up on the 2000 wheel

(in reply to 90mustang)

Post #: 5