cutting to install a S.I. cage?

Printable Version

CBR Forums >> Racing and Recreational >> Stunters Corner >> cutting to install a S.I. cage?

Page: [1]

Login Message << Older Topic   Newer Topic >>

cutting to install a S.I. cage? - 2/21/2007 10:15:06 PM    zeke7681 Posts: 47 Joined: 10/5/2006 Status: offline was wondering if you need to cut any plastics to put on a sick innovations cage on a Honda 929 Post #: 1

RE: cutting to install a S.I. cage? - 2/22/2007 9:38:17 PM    velocity   Posts: 20 Joined: 1/10/2007 Status: offline If you look at their website http://www.sickinnovations.com/929_cage_1.jpg you will have to at least cut/ drill the bottom part of the fairing so the 2 sides can connect. (in reply to zeke7681) Post #: 2

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
doncollins 6222 voodoochyl 6166 tahoe sc 5795 pitsvtec 5316 rrasco 4842 d2dgraphix_6 4673 blue fox 4259 vpsophmore 4136 havoc 3971 chainstretch 3850

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.