RE: Undertail Kit

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

RE: Undertail Kit

Printable Version

CBR Forums >> Past CBR Models >> CBR 600F2 >> RE: Undertail Kit

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: Undertail Kit - 4/30/2007 10:28:07 AM

bmg velocity

Posts: 1353
Joined: 12/14/2006
Status: offline

I just cut the stock fender almost completely out, and neatly, except for the small areas I needed for guiding the wiring, etc.

Just my opinion but...

The F2 tail section wraps under anyway, so you can't see underneath the rear like you can on the RR.

_____________________________

Does not want to debate insurance co.'s or bad drivers for at least a decade or 10. Want to argue the merits? You are a one man show. Sorry no takers here.

(in reply to naturaldisaster)

Post #: 16

RE: Undertail Kit - 4/30/2007 2:03:55 PM

xbatmanx

Posts: 13
Joined: 4/30/2007
Status: offline

No I am a noob on here. We just picked up an F2 a few weeks ago for a friend of mine who lost his bike unfairly last year. I will have pictures of it soon.

Sean

(in reply to cbrjeeper)

Post #: 17

RE: Undertail Kit - 5/1/2007 9:30:54 AM

hurayta

Posts: 75
Joined: 3/20/2007
Status: offline

Jeeper, I am going to post the pics tonight. I am currently on my way to Dallas. If you were talking about the tubular passenger pegs, the undertail will need to be modified for the bar that bolt up at the back. If you have 94 F2 or F3 passenger pegs nothing will need to be modified.

(in reply to xbatmanx)

Post #: 18

RE: Undertail Kit - 5/1/2007 2:49:48 PM

cbrjeeper

Posts: 639
Joined: 9/7/2005
From: Port Saint Lucie, FL
Status: offline

Yeah, my bike still has all of the factory bars and crap under it. So, I'd have to cut all that out? I was planning to do it eventually anyway and swap to the solid F3 passenger pegs. But, if you've gotta do it to also do the undertail, looks like I'll be doing it sooner than thought.

Can't wait to see the pics installed.

Tylor

_____________________________

You meet the nicest people on a Honda

(in reply to hurayta)

Post #: 19

RE: Undertail Kit - 5/1/2007 4:33:01 PM

hurayta

Posts: 75
Joined: 3/20/2007
Status: offline

Jeeper, the only thing that you would have to do to use the stock pegs would be to either trim some of the undertail to allow space for the bar that goes to the back, or if you are good with a hacksaw and grinder, you could cut the bar off and you would have to modify the undertail at all. Here are a couple of pics of the trunk plastic after it has been trimmed. I dont have the pics of the bike with the undertail installed with me. I will be posting them Saturday when I get back home.

Thumbnail Image