cct whine?
Login | |
|
cct whine? - 3/17/2007 10:13:58 AM
|
|
|
zrad
Posts: 96
Joined: 4/23/2006 Status: offline
|
Does anyone's cam chain tensioners whine @ idle? I think maybe where my wierd whine is coming from. When I scope it I get the whine from the tensioner housing all the way thru the bottom end in line with the cam chain. The whine fades as I rev the bike?(or the load exhaust masks it). Should this worry me? Is it a common problem with these bikes? I have had some noisey bikes and I know what valve, cam, bad crank noise sounds like and this is different. No different with clutch in or out. I know its tough to give advice without hearing it for yourself but any input is appreicated. Its a fairly loud whine and its a 929rr.
|
|
|
|
|
|
RE: cct whine? - 3/17/2007 4:42:29 PM
|
|
|
xtremef4i
Posts: 285
Joined: 11/16/2006 Status: offline
|
I don't know much about 929's but on my F4i the CCT rattled, not whined. It only did it at the 5,000-7,000 RPM range but made no niose at an idle
_____________________________
2001 CBR 600F4i Red/White Lots of Chrome Two Bros pipe K&N PClll, RPM ignition advancer 520 -1 +2 Vortex tripple clamp Goodridge SS braided lines Undertail & Tire Hugger RaceTech suspension
|
|
|
|
|