turn signal wiring question

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

turn signal wiring question

Printable Version

CBR >> Past CBR Models >> CBR 600F4 >> turn signal wiring question

Page: [1]

Message

<< Older Topic Newer Topic >>

turn signal wiring question - 3/19/2007 9:02:32 AM

xrvapunkx

Posts: 29
Joined: 11/30/2006
Status: offline

ok, my new led front turn signals have 2 wires, my factory lights have 3 wires coming out, 2 blue, 1 green,, on one side. orange and one green on the other, i dont care about the running lights, just the turn signals
any help is appriciated

Post #: 1

RE: turn signal wiring question - 3/19/2007 3:19:42 PM

mach9

Posts: 186
Joined: 3/12/2005
Status: offline

Your post confused me a bit. You should have:

Left light:
Green - connects to your ground of your new lights
Lightblue/white - not used goes to the running lights
Orange - goes to your positive on your new lights

Right light:
Green - ground
Orange/white - not used running light
Lightblue - + on new lights

Im pretty sure thats right....worse case I have the running light + and the flasher + backward, so if the leds come on constantly like running lights, switch the wires. Should be correct though.

(in reply to xrvapunkx)

Post #: 2

RE: turn signal wiring question - 3/20/2007 8:19:52 AM

xrvapunkx

Posts: 29
Joined: 11/30/2006
Status: offline

thanks a bunch, ill give this a try this afternoon when i get some new fuses

(in reply to mach9)

Post #: 3

RE: turn signal wiring question - 3/22/2007 4:41:08 AM

mach9

Posts: 186
Joined: 3/12/2005
Status: offline

Any luck? as long as the common (-) is right the other should be easy to figure out