parting out '99 F4 + f2/F3 engine
Login  | |
|
parting out '99 F4 + f2/F3 engine - 3/19/2007 3:12:27 PM
|
|
|
GreaseMonkey83
Posts: 86
Joined: 5/11/2006
Status: offline
|
Ive got a motor/tranny off of a 1995 cbr 600 F3 with 19xxx miles on it, the cylinder head is off of it right now. It comes with 2 heads, one is the original off the bike and the other is a used one that i bought. both are complete with cams.
im also parting out a 99 cbr f4. the bike only had 6000 miles on it when it was wrecked. basically the entire front end except for the brake caliper and hand controlls, and all of the plastic except for the rear fairing is junk. It has a two brothers racing aluminum slip on exhaust that is in good shape. the motor and tranny should be ok, but i havent tried to get it running so im not going gaurantee anything. the swing arm is polished and in good shape as well. the rear wheel is fine. the seat is good as well. if theres anything you need off this bike let me and ill see what kind of shape it is in. Ill ship some stuff but for the big parts like the engine/tanny, the purchaser will have to pick up or coordinate shipping.
ill take $150 for the 95 600 motor and both heads, and ill take $250 for the 99 motor/tranny, everything else, make an offer... the worse i can do is say no.
the 99 also has a wheelie sprocket, not sure how many teeth, but ill count them if your interested.
ive also got an aluminum fender eleminator kit and frame sliders for the F4.
Thanks, Allen
------------------------SOLD PARTS-------------------------
cush drive/rear sprocket
exhuast
rear rotor
frame sliders
F3 motor
F4 motor and carbs (sale pending)
< Message edited by GreaseMonkey83 -- 4/2/2007 8:01:54 PM >
|
|
|
|
|
|
|
RE: parting out '99 F4 + f2/F3 engine - 3/19/2007 3:17:36 PM
|
|
|
GreaseMonkey83
Posts: 86
Joined: 5/11/2006
Status: offline
|
im located in toledo, ohio.
|
|
|
|
|
Printable Version
