fender elim Question

Printable Version

CBR Forum >> Current Honda CBR Models >> 1000 Modifications >> fender elim Question

Page: [1]

Login Message << Older Topic   Newer Topic >>

fender elim Question - 3/25/2007 6:34:28 PM    Maxboost44   Posts: 82 Joined: 12/15/2006 Status: online Ok first I feel like an absolute moron for having to ask this Q, but i have a bikelitez.com fender elim kit and the wires for the plate light are not workin.  I jumped them right to the battery to check my crimp connections and they lit up. but when plugged back into the regular harness they wont come on.  the question is... is there like a light sensor switch that turns the light on when it gets dark kinda like a car has for daytime running lights (i doubt this but who knows anymore), or did i blow a fuse when I attemped to soldier the wires instead of qwik crimping them. this is a 06 1000RR.  I feel like a moron cuz this is so simple but it doesnt seem to like me thanks in advance for the help -Max _____________________________ If you're not livin life on the edge you're taking up too much room Post #: 1

RE: fender elim Question - 3/25/2007 8:27:41 PM    Mpolitan0 Posts: 40 Joined: 3/7/2007 From: Salem , MASS Status: offline you had to of blown a fuse, the light is always on when the bike is on. _____________________________ 2006 CBR 1000RR (in reply to Maxboost44) Post #: 2

RE: fender elim Question - 3/25/2007 8:32:37 PM    brendan1026   Posts: 52 Joined: 2/4/2007 Status: offline The plate light should come on when the key is in the on position. I would take a volt meter to the possitive and negative leads from the harness that your using and check that you have power there with the key on first. If so then it's you connection, if not then it's most likely a fuse. (in reply to Maxboost44) Post #: 3

RE: fender elim Question - 3/25/2007 8:42:25 PM    Maxboost44   Posts: 82 Joined: 12/15/2006 Status: online Yeah I figured I blew a fuse, and it took me a while to find the fuse box, I have yet to pull the fairing and check fuse but will update the thread tomorrow night when I check it. _____________________________ If you're not livin life on the edge you're taking up too much room (in reply to brendan1026) Post #: 4

RE: fender elim Question - 3/28/2007 7:52:57 AM    Maxboost44   Posts: 82 Joined: 12/15/2006 Status: online Ok so I did blow a fuse, so i took off the body panel and put a new one in, then put the frotn back together then plugged up my undertail it still didnt work.  i was doing this on my lunch break yesterday. when the thing didnt light up I just left and went back to work.  one of the mechanics here reminded me that LEDs only can go one way so when I got home i switched the terminals and it lit up.  once again i feel like a moron but im glad it works -max _____________________________ If you're not livin life on the edge you're taking up too much room (in reply to Maxboost44) Post #: 5

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7168 doncollins 6257 tahoe sc 5874 rrasco 5615 pitsvtec 5323 d2vw14_20 5095 tk954rr 4900 vpsophmore 4719 blue fox 4575 chainstretch 4558

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology