Exhaust Install Easier?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Exhaust Install Easier?

Printable Version

CBR >> Current Honda CBR Models >> 1000 Modifications >> Exhaust Install Easier?

Page: [1]

Message

<< Older Topic Newer Topic >>

Exhaust Install Easier? - 4/10/2007 2:41:48 PM

Orangebutter

Posts: 176
Joined: 2/16/2007
Status: offline

I was wondering if anyone knows or have done the exhaust on a cbr WITHOUT taking all of the tail section off. In other words just cut the pipe right behind the muffler and then just slip the new muffler on.

Post #: 1

RE: Exhaust Install Easier? - 4/10/2007 3:11:37 PM

MgA_ODEN

2005 Ride Of
The Year
Posts: 2072
Joined: 4/19/2005
From: Spring , Tx
Status: offline

Nope.

http://www.hardracing.com/CBR1000Exhaust.htm

_____________________________

Black 2004 CBR1000RR

(in reply to Orangebutter)

Post #: 2

RE: Exhaust Install Easier? - 4/10/2007 6:02:13 PM

myride

Posts: 15
Joined: 3/7/2007
Status: offline

no you have to take the tail section off there is bolts under it for the muffler. i did mine i put on a hotbodies its easy to do

(in reply to MgA_ODEN)

Post #: 3

RE: Exhaust Install Easier? - 4/10/2007 9:22:33 PM

DWT74

Posts: 167
Joined: 2/28/2007
Status: offline

The 1000 tail section comes off a whole lot easier than a 600RR tails do, they are shorter. Dont be afraid to bend it (spread) it a little not alot just enough to get the right side to clear the subframe then it will lift right off, dont forget your 4 wires on the left side, hope this helps

(in reply to myride)

Post #: 4

RE: Exhaust Install Easier? - 4/11/2007 1:42:43 AM

Orangebutter

Posts: 176
Joined: 2/16/2007
Status: offline

I think I will give it a shot instead of having the dealer do another install and taking my leg. I was just curious if you could just cut the pipe just behind the muffler and install with a clamp of some sort. That way if you wanted to switch to another muffler it would be any easier thing to do. And it wouldn't take a few hours just minutes.

(in reply to DWT74)

Post #: 5