Aluminium Mesh Mod. Nice!!!

Printable Version

CBR Forums >> Past CBR Models >> CBR 600F3 >> Aluminium Mesh Mod. Nice!!!

Page: [1]

Login Message << Older Topic   Newer Topic >>

Aluminium Mesh Mod. Nice!!! - 4/20/2007 5:34:10 PM    land_warrior.rus Posts: 186 Joined: 3/5/2007 Status: offline Hi guys. Just put in some aliuminium mesh and thought i post some pics and a how-to: What i used: a. Aliuminium mesh diamond shape(bought it in car modding shop) b. Some Pliers and side cutters c. Some Zip ties d. Some Epoxy How-to: 1.Cut off a piece of aluminium mesh just slightly biger then side cover opening(there are two openings in service cover on F3, so you'll need 2 pieces of mesh for each side) 2.Put it against the plastic cover from the inside and trim the mesh so you have only about 1/2" of extra mesh around the openig thet you are trying to cover. 3.Now bend the extra mesh around the opening by pressing on it with your fingers to give it shape. 4.Zip tie the mesh in few places to keep it secure in place. 5.Now apply some epoxy in a few places. 6.Let it dry and set.Now cut All zip ties and reinstall the plastic cover. P.S.aliuminium mesh that i used had particular patern, so just make sure all the mesh is installed same way. Now some pics. Thumbnail Image Thumbnail Image Thumbnail Image Thumbnail Image Attachment (4) _____________________________ We Work to live not live to work!!! Post #: 1

RE: Aluminium Mesh Mod. Nice!!! - 4/20/2007 5:35:30 PM    land_warrior.rus Posts: 186 Joined: 3/5/2007 Status: offline And some more Thumbnail Image Thumbnail Image Thumbnail Image Thumbnail Image Attachment (4) _____________________________ We Work to live not live to work!!! (in reply to land_warrior.rus) Post #: 2

RE: Aluminium Mesh Mod. Nice!!! - 4/20/2007 5:36:27 PM    land_warrior.rus Posts: 186 Joined: 3/5/2007 Status: offline And one more Thumbnail Image Attachment (1) _____________________________ We Work to live not live to work!!! (in reply to land_warrior.rus) Post #: 3

RE: Aluminium Mesh Mod. Nice!!! - 4/20/2007 6:02:19 PM    land_warrior.rus Posts: 186 Joined: 3/5/2007 Status: offline Will do the back fairing as well tomorrow. _____________________________ We Work to live not live to work!!! (in reply to land_warrior.rus) Post #: 4

RE: Aluminium Mesh Mod. Nice!!! - 4/25/2007 11:25:24 AM    oNi Posts: 255 Joined: 6/22/2006 Status: offline Looks good, thanks for the Pics and How to!  _____________________________ (in reply to land_warrior.rus) Post #: 5

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 7173 doncollins 6259 tahoe sc 5876 rrasco 5618 pitsvtec 5323 d2vw14_20 5100 tk954rr 4930 vpsophmore 4728 blue fox 4575 chainstretch 4567

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology