exhaust
Login  | |
|
|
|
|
|
RE: exhaust - 4/27/2007 10:56:19 PM
|
|
|
bobjoezx
Posts: 2406
Joined: 9/27/2005
From: Wisconsin
Status: offline
|
first four gears.... right 200mph... what planet u on
_____________________________
|
|
|
|
|
RE: exhaust - 4/27/2007 11:11:41 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007
Status: offline
|
the only reason i bought this bike is because a friend has one that i watched him buy the bike all stock...we picked it up and went straight to a bike shop were he put a 2 brothers pipe on it , custom air box w/ram air and a power comand...he road it for 3 days and took it back..went one tooth up in the front and one down in the back.which kept wim from pulling up,except in first...that is the only reason i am doing this project...
_____________________________
DON'T RIDE FASTER THAN YOUR GAURDIAN ANGEL'S CAN FLY
|
|
|
|
|
RE: exhaust - 4/27/2007 11:12:51 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007
Status: offline
|
i ment 2 teeth down in the back
|
|
|
|
|
RE: exhaust - 4/28/2007 9:26:53 AM
|
|
|
bobjoezx
Posts: 2406
Joined: 9/27/2005
From: Wisconsin
Status: offline
|
who tuned the bike because power commander is nothing without proper tuning...... also did u recalibrate speedo...
_____________________________
|
|
|
|
|
RE: exhaust - 4/29/2007 11:29:55 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007
Status: offline
|
friend of mine owns a bike shop...the results were tested on a dyno...i went ahead and bought a full exhaust...so i will find out soon enough what my bike will do...and i will post dyno results...
|
|
|
|
|
RE: exhaust - 4/30/2007 1:04:13 AM
|
|
|
bobjoezx
Posts: 2406
Joined: 9/27/2005
From: Wisconsin
Status: offline
|
ooooooookkkkkkk
_____________________________
|
|
|
|
|
|
|
RE: exhaust - 4/30/2007 5:29:42 PM
|
|
|
pimpncbr954s
Posts: 606
Joined: 3/26/2007
Status: offline
|
I wont say its impossible without major modifications, the sprocket change with 17 front and 41 rear would make it more possible. the bike would be horrible as far as sluggish taking off. the only thing i can say is wit the sprocket change is the speedo will be off but also you have to have a stong enough engine to push the sprocket change which is not to rediculous. worth tryin, but i do believe wit the modifications he has will push it above 180 maybe 185.
|
|
|
|
|
RE: exhaust - 4/30/2007 8:21:06 PM
|
|
|
outsider8
Posts: 1113
Joined: 6/3/2006
Status: offline
|
my bike has 40/17 gearing-open exhaust with slotted cam sprockets-degreed in(timing retarded
as far as posible,w/out risk of engine damage!)i have not seen a need for a pc3 at the current
time-but a need for a ignition module-slow speeds?-engine chuggs bad on decel(from high rpms)
with the gearing and the power band set all the way up-the front end stays down-if it does come up
(and it does)shift gears(power wheelies are harder to do!)-5th gear redline shows approx
175-180-then shift to 6th-at full redline maybe 195-at 185 about 2k rpms to go,but the torque
curve is gone,i must remind you most of the mods have gone into suspension-a stock 954
is not safe at these speeds!!
the gearing set-up that i use/like-makes for pleasant riding with out loss of performance(just
comes alive at higher speeds)-here is a picture of my bike at the current time
just be safe with what ever you do
o8
< Message edited by outsider8 -- 6/13/2007 8:03:41 PM >
|
|
|
|
|
Printable Version
exhaust - 
