RE: exhaust
Login | |
|
RE: exhaust - 5/8/2007 7:01:17 AM
|
|
|
outsider8
Posts: 1113
Joined: 6/3/2006 Status: offline
|
quote:
ORIGINAL: WoodyRR Lowered 3 inches?!?!? I haven't looked into lowering too much, but is this even possible? Joey, just shut up with all the talk and let us know when you get to ride your bike w/mods. If your buddy has the same mods on the same bike that it's in the same condition, and you don't weigh any more than him, than you should be getting a very similar performance result. Let us know when it's done. It's been about a week since your first post, how much longer until it's done? Whatever happened to your initial problem with your "custom airbox"? quote:
ORIGINAL: joey954rr friend of mine owns a bike shop...the results were tested on a dyno...i went ahead and bought a full exhaust...so i will find out soon enough what my bike will do...and i will post dyno results... You talk about dyno results, but you didn't even tell us anything about what the results showed. If the dyno showed 200 MPH top speed, then how could he hit 204 on the street with all the wind resistance?! I don't mean to rag on you Joey, but this all seems like BS...I guess I have to see to believe, or you have to fill in these "holes" in what you're saying. it is posible to lower a 54 3inches-shock face plates are available(i own a set)-will lower rear either 2 or 3 inches-the forks can be lowered about 2 inches of you place the clip-ons above the upper clamp-and cut 1inch or more off of the fork dampening cartridges(internal fork mod) o8
|
|
|
|
|
|
RE: exhaust - 5/8/2007 11:59:00 AM
|
|
|
freemanmj
Posts: 25
Joined: 12/17/2006 Status: offline
|
Do any of us really think his buddy is hitting over 200 mph on a 954 without serious engine work? That thing would have to dyno at least 230 hp or so. Where is the extra 95 to 100 hp coming from? Unless that thing has NOX, it is not going to even come close. I wonder if these guys are just going by their speedometer, which without adjustment is going to read way off with different sprockets. There was a recent test where a new 636 was showing 182 on the clocks and that bike tops out in the 160s. Even stock bikes have quite a bit of speedometer error at high speed. What a sad waste of a great bike trying to hit 200 mph on the street. Why spend all that money on what will certainly make a strong motor destruct.
|
|
|
|
RE: exhaust - 5/8/2007 12:41:32 PM
|
|
|
outsider8
Posts: 1113
Joined: 6/3/2006 Status: offline
|
quote:
ORIGINAL: freemanmj Do any of us really think his buddy is hitting over 200 mph on a 954 without serious engine work? That thing would have to dyno at least 230 hp or so. Where is the extra 95 to 100 hp coming from? Unless that thing has NOX, it is not going to even come close. I wonder if these guys are just going by their speedometer, which without adjustment is going to read way off with different sprockets. There was a recent test where a new 636 was showing 182 on the clocks and that bike tops out in the 160s. Even stock bikes have quite a bit of speedometer error at high speed. What a sad waste of a great bike trying to hit 200 mph on the street. Why spend all that money on what will certainly make a strong motor destruct. there is no question that the engine would need extensive work & $$-to the point that it is not worth doing!!-my question is simply this-the speedometer error is present on a stock bike-most riders-drop the front sprocket 1-and raise the rear 2-the reports i get from them is the speedometer is off quite a bit more at this point-it would seem to me the changing spockets sizes-up 1 front down 2 in the rear-would actually make the speedometer more correct??(this is my set-up) i dont know anyone with a radar,nor am i willing to ask cop to radar me at 185mph/299kph!!!! one thing that i do know for sure-correct or incorrect at those speeds-you/me/all of us need to be watching the road not the speedometer
|
|
|
|
RE: exhaust - 5/8/2007 11:06:24 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007 Status: offline
|
well the guy i know with this 200+ 954 is full of shit...he told me the mods to make....and that is what i did...after about 2K worth of mods and a lot of waisted time...his bike has about 7k worth of motor...i found this out from the mechanic that did the mods to my bike...well it turns out the he is the guys uncle...he said that the dude has a turbo and is spraying...i didnt even see these mods when i was looking at his bike...it looks almost stock...well when i said something today to him he told me about the turbo and nos...the bottle is under the seat...and the turbo is painted the same as the engine so it is not noticable..he calls it a sleeper...he told me all the bs because he didnt want my bike to come out faster than his....well the mods i made work well...and i am done with this...sorry guys...i know why there was so much dought now....i am not much of a moto mechanic just know how to ride really welll...my bike is around 150 hp tops out with me on the bike around 185 ...think some thing is out wack in my front end because at around 175 she gets really scarry vibration going on... p.s. i tried to upload pics but says the files are to big...tell me how to fix and i will upload some....oh yea i had a custom air box made for $800
_____________________________
DON'T RIDE FASTER THAN YOUR GAURDIAN ANGEL'S CAN FLY
|
|
|
|
RE: exhaust - 5/8/2007 11:07:41 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007 Status: offline
|
this asshole friend of mine is pushing 195hp
_____________________________
DON'T RIDE FASTER THAN YOUR GAURDIAN ANGEL'S CAN FLY
|
|
|
|
RE: exhaust - 5/8/2007 11:11:08 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007 Status: offline
|
w/o spray.
_____________________________
DON'T RIDE FASTER THAN YOUR GAURDIAN ANGEL'S CAN FLY
|
|
|
|
RE: exhaust - 5/8/2007 11:14:35 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007 Status: offline
|
and one more thing..if he would have told me about the mods....i couldnt afford to do that kind of work on it anyway...nos,bored,turbo, all high performance cams, pistons, ext..i wish...i really didnt have the money to do the mods i made....but i got so hyped up on this that i just started swiping that credit card...
_____________________________
DON'T RIDE FASTER THAN YOUR GAURDIAN ANGEL'S CAN FLY
|
|
|
|
RE: exhaust - 5/8/2007 11:28:03 PM
|
|
|
bobjoezx
Posts: 2404
Joined: 9/27/2005 From: Wisconsin Status: offline
|
wow you really only have the IQ one step higher then the mentally handicaped
_____________________________
|
|
|
|
RE: exhaust - 5/8/2007 11:33:48 PM
|
|
|
joey954rr
Posts: 329
Joined: 4/27/2007 Status: offline
|
comon now...the reason people join these sites is to learn...take it easy just trying to learn some thing new
_____________________________
DON'T RIDE FASTER THAN YOUR GAURDIAN ANGEL'S CAN FLY
|
|
|
|
RE: exhaust - 5/9/2007 10:49:16 AM
|
|
|
bobjoezx
Posts: 2404
Joined: 9/27/2005 From: Wisconsin Status: offline
|
ya and about 99% of my 1100+ posts are helpful... but when you come in here like king shit and talk out of your ass it's annoying.. if you look we told you the same thing before you did all that work to your bike to get to 200mph on a damn public road.. if u had half a brain you wouldnt try to hit a speed like that in a public road... so i have no respect for you
_____________________________
|
|
|
|
RE: exhaust - 5/9/2007 10:55:19 AM
|
|
|
WoodyRR
Posts: 384
Joined: 5/1/2007 From: NW suburb, IL Status: offline
|
quote:
ORIGINAL: bobjoezx ya and about 99% of my 1100+ posts are helpful... but when you come in here like king shit and talk out of your ass it's annoying.. if you look we told you the same thing before you did all that work to your bike to get to 200mph on a damn public road.. if u had half a brain you wouldnt try to hit a speed like that in a public road... so i have no respect for you Enough said....Joey, were you posting all these posts just to get your post count up?
|
|
|
|
|