@voodoochyl

Printable Version

CBR >> Current Honda CBR Models >> CBR 600F4i >> @voodoochyl

Page: [1]

Login Message << Older Topic   Newer Topic >>

@voodoochyl - 5/8/2007 11:43:11 PM    Zultan Posts: 203 Joined: 12/1/2006 Status: offline I was looking around for slip ons I should get and I can't really find any cool ones so I'd figure I'll ask you or anyone that has a cool looking pipe like yours :D Did you custom paint that or something?  I got an 06 blue/black f4i and was wondering where I could find a pipe like that. _____________________________ 06 Blue/Black F4I Post #: 1

RE: @voodoochyl - 5/8/2007 11:55:11 PM    2002F4!   Posts: 120 Joined: 4/30/2007 From: southern illinois Status: offline http://www.kneedraggers.com/list/1.1/bike/Honda/CBR600F4i/2006 there you go! (in reply to Zultan) Post #: 2

RE: @voodoochyl - 5/8/2007 11:57:09 PM    Leveltwo Posts: 1879 Joined: 3/31/2006 From: Wildwood, MO Status: offline i love the micron slips, but my bike came with a yoshi, so i had to deal....colord pipes are the shiznt _____________________________ 04 F4i - PCIII - Yoshi TRS Slip - Hotbodies Turns - Vortex Sliders - Rumble Undertail - Zero Gravity DB - HVMP Barends (in reply to 2002F4!) Post #: 3

RE: @voodoochyl - 5/9/2007 12:22:01 AM    Zultan Posts: 203 Joined: 12/1/2006 Status: offline thank you! :) _____________________________ 06 Blue/Black F4I (in reply to Leveltwo) Post #: 4

RE: @voodoochyl - 5/9/2007 12:24:58 AM    voodoochyl Posts: 6241 Joined: 7/31/2006 From: Grants Pass, Oregon Status: offline Yeah, Zultan...it's a Micron ( http://www.micron-exhaust.com/index.htm ).  I ordered direct (maybe check Ebay), but the "fade" units cost a little more.  They offer high and standard mounts, but remember for your '06 you have to buy an O2 sensor as well as the pipe.  Just call up the customer service, they are cool as hell, tell them what you need, and you're good to go.  Mine ran me about $460 and the sensor was about $20.  _____________________________ CBR Forum Buddy: Catmang (in reply to Leveltwo) Post #: 5

RE: @voodoochyl - 5/9/2007 12:32:22 AM    Zultan Posts: 203 Joined: 12/1/2006 Status: offline one more question then!  Where can I find an o2 sensor if I buy the pipe? _____________________________ 06 Blue/Black F4I (in reply to voodoochyl) Post #: 6

RE: @voodoochyl - 5/9/2007 12:38:22 AM    voodoochyl Posts: 6241 Joined: 7/31/2006 From: Grants Pass, Oregon Status: offline Sorry, you can buy it directly from Micron.  It is a bitch to get attached.  The harness for the sensor is directly underneath the left side of the tank.  I took off my tank to gain easier access.  Anyway, the thing sounds beautiful.  Deep growl to start and never gets painfully high pitched.  Anyway, good luck, my man.  New pipes rule!!!  _____________________________ CBR Forum Buddy: Catmang (in reply to Zultan) Post #: 7

RE: @voodoochyl - 5/9/2007 12:39:40 AM    Zultan Posts: 203 Joined: 12/1/2006 Status: offline cool, just got a fender eliminator and probably going to get the pipe so i can just rip the whole thing apart at once for some fun in the sun! :P  Thanks for the help :) _____________________________ 06 Blue/Black F4I (in reply to voodoochyl) Post #: 8

RE: @voodoochyl - 5/9/2007 2:53:51 AM    JZHALES Posts: 1569 Joined: 7/30/2006 Status: offline not eveyone is ballin like you voodoo, i decided my bike was too quite yesterday and took my pipe off!!!!!! sounds real mean _____________________________ my bike has character (in reply to Zultan) Post #: 9

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 6241 doncollins 6227 tahoe sc 5798 pitsvtec 5318 rrasco 4875 d2dgraphix_6 4673 blue fox 4286 vpsophmore 4188 havoc 4009 chainstretch 3956

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.