F3 carbs fit a F2?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

F3 carbs fit a F2?

Printable Version

CBR Forums >> Past CBR Models >> CBR 600F2 >> F3 carbs fit a F2?

Page: [1]

Message

<< Older Topic Newer Topic >>

F3 carbs fit a F2? - 10/22/2004 1:44:57 AM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

Does a CBR600F3 carbs bolt right on to a F2?

Thanx
Nipz

Post #: 1

RE: F3 carbs fit a F2? - 10/22/2004 7:26:59 PM

sirlimpzalot

Posts: 1404
Joined: 8/24/2004
From: Roseville, CA
Status: offline

I believe that they will bolt on, but remember the F3 carbs used the ram air system and are set up for that so if you put it on you will have to really mess with the settings or install the F3 ram air system as well as the F3 body to incorporate the system

(in reply to Nipz)

Post #: 2

RE: F3 carbs fit a F2? - 10/25/2004 11:57:55 PM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

ok thank! do you know how hard it is to get the ram air in?

(in reply to sirlimpzalot)

Post #: 3

RE: F3 carbs fit a F2? - 10/26/2004 12:29:55 AM

cbr600f2rydah

Posts: 14
Joined: 10/20/2004
Status: offline

It would be a lot easier just to fabricate an f3 body to fit on it like sirlimpz said.....But do the f3 carbs really flow that much better for the work of swapping them.....cause if it was up to me, I would take the carbs to a machinist and have him rework the stock carbs before I did all that work.

_____________________________

1994 Honda CBR600f2, two brothers exhuast, geared down, K&N filter, K&N stage 1 jet kit.

(in reply to Nipz)

Post #: 4

RE: F3 carbs fit a F2? - 10/26/2004 1:00:40 PM

sirlimpzalot

Posts: 1404
Joined: 8/24/2004
From: Roseville, CA
Status: offline

I know that Targa sells coplete front plastic kits for the F3 that comes pre-painted..and the guages may not fir since the F2 uses cable operated speedo and the F3 is digitally controlled..so I would just get a jet kit and work it that way...

(in reply to Nipz)

Post #: 5

RE: F3 carbs fit a F2? - 11/13/2004 7:23:58 PM

Nipz

Posts: 215
Joined: 10/22/2004
Status: offline

Thank for all the info. just the f3 carbs are a little bigger. But i would proble have my carbs work over to save time :) but that down the road.

Thanx
Nipz

_____________________________

~~~~~~~~~~~~~~~~~
1993 CBR600F2 (sold)

1991 CBR600F2 893cc AKA F9

(in reply to sirlimpzalot)

Post #: 6