Other Bike Parts That WILL Fit On The F4
Login  | |
|
Other Bike Parts That WILL Fit On The F4 - 6/3/2007 5:01:53 PM
|
|
|
therabbit
Posts: 476
Joined: 4/26/2007
Status: offline
|
These are all parts that I have on my bike, I can gaurentee 100% that they will work for you (Possibly won't work for cali-spec?):
- F4i Front Rim (You HAVE to have the rotors and spacers for this to fit on the stock axle)
- F4i Forks (The F4 fender won't fit though, you'll need an F4i fender)
- F4i Cylinder Heads (You'll need to drill and tap vacuum ports in the intakes for cylinders 2&3 and you'll need to block off the cam angle sensor, or just leave the sensor in but not connected to anything)
- F4i Side Fairings (L/R) and Lower V Fairing (These are direct bolt ons and way easier to find then F4 fairings)
- F4i Front Calipers (Exact same mounting position and bracket as the F4 calipers)
These are parts that other people have gotten to fit with modifications required:
- F4i Front Fairing/Headlight (There's several posts about what modifications are required to do it, do a search)
- F4i Subframe and Seats (Two seat conversion)
Parts That WILL NOT fit:
- F4i headers (Different exit angle) (Note: It might be possible to get it to work if you have the F4i muffler and mid pipe as well, but I have not tried that)
- F4i Muffler/Midpipe (Different entrance angle) (Note: A consequence of this is that aftermarket exhausts designed for the F4i will not bolt right up for the F4)
- F4i Front Brake Rotors on an F4 Rim (Different bolt pattern, but as I said above, you can put on an F4i rim with the F4i rotors)
I think that's all I've got for now. Please contribute to this thread if you've put anything from another bike onto your F4 (and list modifications required if any). I find that it's getting harder and harder to find used parts for my F4, so hopefully this will help out other people as well.
< Message edited by therabbit -- 6/6/2007 4:54:06 AM >
|
|
|
|
|
|
|
Printable Version
RE: Other Bike Parts That WILL Fit On The F4 - 
