RE: all anyone needs!
Login  | |
|
RE: all anyone needs! - 1/15/2008 3:20:20 PM
|
|
|
AlphaBiker24
Posts: 96
Joined: 1/7/2008
Status: offline
|
how much was that kit papi? did it come with the plate mount and the light? are the blinkers integrated in the light?
|
|
|
|
|
|
|
RE: all anyone needs! - 1/15/2008 7:20:59 PM
|
|
|
Papi Chingon
Posts: 351
Joined: 11/4/2007
Status: offline
|
the kit comes with a rear hugger with leds in it that illuminate the plate, plate bracket, and taillight with integrated blinkers. the kit i bought was like $220 or $230 delivered, but you can get it done cheaper if you only want certain parts, or if you send them a taillight to modify, or your rear hugger to add leds to. good people over there and they respond very fast to questions + super fast shipping.
_____________________________
sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!
|
|
|
|
|
RE: all anyone needs! - 1/15/2008 7:34:25 PM
|
|
|
be vertical
Posts: 655
Joined: 8/21/2007
Status: offline
|
Heres mine.. I built it off a 03 clear alternatives integrated light, and then got a vertical mount plate holder off 1tail.com.
http://www.cbrforum.com/m_459538/mpage_1/key_/tm.htm#459552
_____________________________
On the black wind forever we ride on together destroying your evil with freedom our guide.
07 600RR .......O^o''
|
|
|
|
|
RE: all anyone needs! - 1/16/2008 2:51:11 PM
|
|
|
AlphaBiker24
Posts: 96
Joined: 1/7/2008
Status: offline
|
sorry the link i posted was supposed to be www.cbrheavenusa.com, it is just like the one papi has and its 150 before shipping....comes with the light with integrated blinkers, plate mount, and plate light
|
|
|
|
|
RE: all anyone needs! - 1/16/2008 6:09:11 PM
|
|
|
WerthTheDrive
Posts: 36
Joined: 10/21/2007
Status: offline
|
i guess i will go ahead and put mine on here.. havent posted in a while.. but i still read them all in my email.. anyways i got mine off ebay.. CBRHeaven.. $150 plus shipping.. fast shipping.. pretty easy install if you know anything.. anyways.. lemme see if i have a decent pic uploaded.. ok..
[image][/image]
these are kinda old.. since i have taken off the rest of the plastic.. and polished up the pipe
here you can see the license plate bracket that comes with it..
i believe it might be the same kit that someone else posted.. he already took off the plastic and polished the pipe.. so there you go.. pretty cheap compared to other kits i've seen.. and i like the way it looks better than most.. so.. you decide
Brad
_____________________________
If all men are created equal then why cant my fat ass cousin ride a bike?
|
|
|
|
|
|
|
RE: all anyone needs! - 1/16/2008 6:57:14 PM
|
|
|
Blue Fox
Posts: 4570
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline
|
^^ It's photoshopped. I called his bluff on the first page, and now I am his arch nemesis. 
_____________________________
Want the LED headlamps? http://cbrforum.com/m_681535/tm.htm Powder Coating TOO!
|
|
|
|
|
RE: all anyone needs! - 1/16/2008 7:11:52 PM
|
|
|
be vertical
Posts: 655
Joined: 8/21/2007
Status: offline
|
I picked up a vertical mount style one off 1tail.com for an 06 600RR that replaces the real wheel tensioner on the sprocket side. Fit on there like stock and was pretty easy to install. If your trying to be legal, I dont recommend this, I get pulled over all the time for improperly mounted plate, and no plate light. Damn good thing I ride with a few local cops. It does in fact look dope-face, and gets the plate off the tail for a nice fresh look. Pics to follow by request.
_____________________________
On the black wind forever we ride on together destroying your evil with freedom our guide.
07 600RR .......O^o''
|
|
|
|
|
RE: all anyone needs! - 1/16/2008 8:57:50 PM
|
|
|
Papi Chingon
Posts: 351
Joined: 11/4/2007
Status: offline
|
"sorry the link i posted was supposed to be www.cbrheavenusa.com, it is just like the one papi has and its 150 before shipping....comes with the light with integrated blinkers, plate mount, and plate light"
a key difference in these kits is the hugger that has led lights installed which illuminate the plate very well. side notes: the plate bracket mounts using the rear footpeg holes, so no drilling is required and it sits nice and high. i don't know if the cbrheaven taillight is the same, but the one in my kit was a clear alternatives which is nice and bright for braking, signaling, and braking while signaling - both in day and night.
"It's photoshopped. I called his bluff on the first page, and now I am his arch nemesis. "
and i would have gotten away with it too if it weren't for you and your pesky comments! drats, foiled again!!!!!
_____________________________
sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!
|
|
|
|
|
|
|
RE: all anyone needs! - 1/16/2008 9:25:29 PM
|
|
|
Papi Chingon
Posts: 351
Joined: 11/4/2007
Status: offline
|
^^^what did you do with your heat shield - cut or take it off completely? if you cut it, what did you use? it you removed it, did you have to remove the exhaust?
_____________________________
sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!
|
|
|
|
|
RE: all anyone needs! - 1/17/2008 12:07:33 AM
|
|
|
Blue Fox
Posts: 4570
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline
|
^^ You can easily trim or cut the heat shield with tin-snips. Just tin-cutting shears will do the trick easy. I had to trim the heatshield on my bike and Captain Slow's bike to make my Raccoon Tail FE kit look right. And remember........I'm still working on a Raccoon Tail for the 07/08 models (now that I'll actually have one.)
_____________________________
Want the LED headlamps? http://cbrforum.com/m_681535/tm.htm Powder Coating TOO!
|
|
|
|
|
Printable Version
07 Blue/Silver 600RR 
