PCIII Maps for the 1000RR

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

PCIII Maps for the 1000RR

Printable Version

CBR Forums >> Current Honda CBR Models >> 1000 Modifications >> PCIII Maps for the 1000RR

Page: [1]

Message

<< Older Topic Newer Topic >>

PCIII Maps for the 1000RR - 11/8/2005 10:52:26 AM

chainstretcher

Posts: 3636
Joined: 11/5/2004
Status: offline

If you have a map that works great and you wanna share, e-mail it to me at webmaster@chainstretcher.com and I'll post it here.
Make sure to list all your pertinent mods (stickers don't really add HP

) along with your screen name so I can give you proper credit.

Disclaimer: Using someone else's map may cause your bike to perform poorly even though you have similar mods. Exercise good judgement when testing new maps and always save your current settings so you can go back if necessary.

Directions: Depending on your set up, you may be able to just click the link and the program will automatically load up the map. If this doesn't work then just right click on the link and hit "save target as ..." then open it up from the PC-USB program.

< Message edited by chainstretcher -- 11/8/2005 4:21:26 PM >

_____________________________

It's better to burn out ...
Than high side!

Post #: 1

RE: PCIII Maps for the 1000RR - 11/8/2005 4:10:05 PM

chainstretcher

Posts: 3636
Joined: 11/5/2004
Status: offline

Dan Kyle Map
Application: Stock exhaust and air filter.

Submitted by: Anubis

Comments: smooths out the fueling under 4k revs where the original map runs rich at low to medium throttle openings.

Anubis' Personal Map
Application: 04 Model, Air Intake Mod, K&N Air filter, Yoshi RS5 Slip On

Submitted by: Anubis

Comments: pulls hard from 2000 revs which it never did prior to the adjustments in the map.

evilbastard
Application: LeoVince full race exhaust with 60mm SBK Ti Can - no baffle. Flapper mod. OEM air filters with snorkels.

Submitted by: evilbastard

Comments: This map is still a little rich in some spots but it's ten times better then any of the maps I've tried. I used a LM1 wide band O2 meter with data logging on the TPS, RPM and MPH to tune this map. Do not use the PC3 accell pump, honda already has one in the bikes efi.

< Message edited by chainstretcher -- 12/18/2005 6:50:49 PM >

_____________________________

It's better to burn out ...
Than high side!

(in reply to chainstretcher)

Post #: 2