LED TURN SIGNALS PROBLEM

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

LED TURN SIGNALS PROBLEM

Printable Version

CBR Forums >> Current Honda CBR Models >> 600 Modifications >> LED TURN SIGNALS PROBLEM

Page: [1]

Message

<< Older Topic Newer Topic >>

LED TURN SIGNALS PROBLEM - 7/31/2007 9:53:13 PM

walt1972

Posts: 22
Joined: 7/31/2007
Status: offline

Hi,I installed a set of rear LED turn signal but they do not blink,they come on but won't blink at all.I know there is a resistor out there to solve this problem but i would like to know if I can use an in line resistor,possible? Thanks.

Post #: 1

RE: LED TURN SIGNALS PROBLEM - 8/1/2007 3:31:13 AM

Blue Fox

Posts: 4577
Joined: 7/14/2006
From: Las Cruces, NM
Status: offline

So, you have LED's in the front AND in the back right?

If you do, then yes, you need resistors. You can go to Autozone, Checker, etc. and get their LED resistors. They're a little large, but that's no problem. You can also order smaller resistors (but they get much hotter) online too.

_____________________________

Want the LED headlamps? http://cbrforum.com/m_681535/tm.htm Powder Coating TOO!

(in reply to walt1972)

Post #: 2

RE: LED TURN SIGNALS PROBLEM - 8/1/2007 7:48:22 AM

woodyracing

Posts: 1326
Joined: 5/3/2006
From: Meridian, MS
Status: offline

do the front and rear signals operate on seperate relays or are they both running off the one by the headlights?
don't have access to a wiring diagram at the moment

_____________________________

Selling my 600RR CLICK HERE!