CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

stuntin

  Printable Version
CBR >> Racing and Recreational >> Stunters Corner >> stuntin Page: [1]
Login
Message << Older Topic   Newer Topic >>
stuntin - 8/1/2007 9:29:07 PM   
TheDouche

 

Posts: 30
Joined: 3/30/2007
Status: offline
haha well all i gotta say is that im a small guy and i eventually want to be able to do a high chair?(thats when you sit on the tank and your feet are on the lights basically right?) now all i gotta say is that it takes a lot of muscle and muscle control to do all this. does anyone have like a workout that they do to build the muscle better for stunts or what the secret to high chairs? still perfecting the balance point thing so im not gunna be trying this for a while until i am ready 
Post #: 1
RE: stuntin - 8/1/2007 9:59:12 PM   
twistatech


Posts: 103
Joined: 1/21/2006
Status: offline
First you have to dent your tank, Then you should buy a hand brake, do a couple push ups and pull ups and you should be able to do it. 

(in reply to TheDouche)
Post #: 2
RE: stuntin - 8/1/2007 11:20:06 PM   
TheDouche

 

Posts: 30
Joined: 3/30/2007
Status: offline
hand brake? do explain

(in reply to twistatech)
Post #: 3
RE: stuntin - 8/2/2007 7:29:15 AM   
civiksi

 

Posts: 116
Joined: 4/30/2007
Status: offline
quote:

ORIGINAL: TheDouche

hand brake? do explain

Hand brake for the rear brake. Dont think you'll be able reach the rear brake from the gas tank.

(in reply to TheDouche)
Post #: 4
RE: stuntin - 8/2/2007 6:45:10 PM   
TheDouche

 

Posts: 30
Joined: 3/30/2007
Status: offline
hahaha why would you need that? just slow down in throttle haha. any advise though as far as high chairs go?

(in reply to civiksi)
Post #: 5
RE: stuntin - 8/2/2007 7:07:38 PM   
CBRollie1000

 

Posts: 81
Joined: 7/14/2006
Status: offline
yah just use the front brake and that will be another stunt the LOW chair haha. j/k

_____________________________

2006 cbr1krr red/black (first bike ever)

fender werkes eliminator kit
flush mount turn signals

(in reply to TheDouche)
Post #: 6
RE: stuntin - 8/2/2007 8:37:23 PM   
twistatech


Posts: 103
Joined: 1/21/2006
Status: offline
Did you dent your tank yet? Because if you try a high chair w/o it dented, you will dent it with your ass, that is if you even stay on the tank when you land. Also you might want to have a hand brake, if you go to high in a highchair you will end up doing a trick called the hospital bed.... but if you insist on breaking your back , sit on the tank and get both legs over the bars, get going about 25 and clutch it up. all there is to it...

(in reply to CBRollie1000)
Post #: 7
RE: stuntin - 8/2/2007 10:21:45 PM   
TheDouche

 

Posts: 30
Joined: 3/30/2007
Status: offline
so where does the extra hand brake usualy go? or do you swap it front hand brake works rear tire and foot brake works front tire? im not gunna be attempting a high chair yet but it would be nice to know what to do and expect. where do you dent the tank or do i just wait to dent it when i pull it off? haha low chair lol. 

(in reply to twistatech)
Post #: 8
RE: stuntin - 8/3/2007 10:44:24 AM   
twistatech


Posts: 103
Joined: 1/21/2006
Status: offline
The extra hand brake goes where your clutch is now, then you get a shorty clutch and put it on top of your new hand brake lever for the clutch. One of these guys probably have a picture of a hand brake set up but I found a couple too here they are...http://www.flickr.com/photos/jorge_180801/438466149/   &   http://www.flickr.com/photos/beadyeye/454637028/
You are going to have to dent your tank when before you try this, otherwise you will not stay on. Here is some pictures of a guy that dented his, I put skateboard grip tape on mine for extra grip. Plus my tank dent isn't quite that big. But I guess it depends on how big your ass is. You have to get a dead blow hammer and pound away, there are probably some posts on here about how to do it. This guy ground his paint off and used bondo to make it smooth. I just dented mine and put some grip tape on there and called her good... here is the post on stuntlife with the pictures... http://www.stuntlife.com/forums/281-stunt-bike-pictures/189253-r6-tank-dent-2.html

(in reply to TheDouche)
Post #: 9
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
CBR Forum >> Racing and Recreational >> Stunters Corner
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl7187
doncollins6264
tahoe sc5876
rrasco5623
pitsvtec5323
d2vw14_205103
tk954rr4975
vpsophmore4735
chainstretch4581
blue fox4577

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.