afterburn problem (Full Version)

CBR >> Past CBR Models >> CBR 900RR

afterburn problem

  

yolio -> afterburn problem (8/2/2007 11:05:12 AM)

hi, i already search for info about this problem but i cant find into 900 subforum, in other models (600rr etc) i see there is a PAIR valve that some members say can be disabled


i look at manual and found that cbr900 california type have a PAIR VALVE and i want know if can be disconnected or check for see if is not working

i see to that mi bike dont have de Sub Air Filter, is attached to air filter i must get it?


thanks for the help i see other say the carbs must be raise in low but i want more info about the PAIR valve on this model


my bike is a cbr 919rr 1996

  
gixxereater -> RE: afterburn problem (8/2/2007 1:07:48 PM)

You dont have a PAIR valve on this bike. 

yolio -> RE: afterburn problem (8/2/2007 2:29:12 PM)

this is part of manual, i dont believe this model have a Pair valve but later of see the manual go out to look at bike and yes, is there, as soon as i can will take a pic fo system already mounted on bike

[image]http://img.photobucket.com/albums/v503/Yolio/varios/PAIR.jpg[/image]

yolio -> RE: afterburn problem (8/4/2007 6:59:55 PM)

i already disable the secondary air system and afterburn as gone
change the cct for an APE and no more noise, other problem was the bike dont go more of 9k rpm now with new cct can take it to red line without problem

i will post pics the monday

Flamed900RR -> RE: afterburn problem (8/4/2007 7:41:59 PM)

Hey where and how do I get a copy of that manual!?

yolio -> RE: afterburn problem (8/6/2007 6:47:09 AM)

here is the pics that probe the cbr919 california model have a PAIR valve, its called "Secondary Air Supply System"

the solution, at least while found something for block the tubes
[image]http://img.photobucket.com/albums/v503/Yolio/sassystem/sas.jpg[/image]

here u can see the tubes of right side
[image]http://img.photobucket.com/albums/v503/Yolio/sassystem/sas1.jpg[/image]

tubes for piston 1 ans 2
[image]http://img.photobucket.com/albums/v503/Yolio/sassystem/sas2.jpg[/image]

for piston 3 and 4
[image]http://img.photobucket.com/albums/v503/Yolio/sassystem/sas3.jpg[/image]

yolio -> RE: afterburn problem (8/6/2007 6:49:47 AM)

the manual its uploading, will be ready for dw in couple minutes

yolio -> RE: afterburn problem (8/6/2007 7:03:32 AM)

done

go here

http://www.movedigital.com/go/yolio

and download manual

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.