afterburn problem

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

afterburn problem

Printable Version

CBR Forum >> Past CBR Models >> CBR 900RR >> afterburn problem

Page: [1]

Message

<< Older Topic Newer Topic >>

afterburn problem - 8/2/2007 11:05:12 AM

yolio

Posts: 39
Joined: 6/12/2007
Status: offline

hi, i already search for info about this problem but i cant find into 900 subforum, in other models (600rr etc) i see there is a PAIR valve that some members say can be disabled

i look at manual and found that cbr900 california type have a PAIR VALVE and i want know if can be disconnected or check for see if is not working

i see to that mi bike dont have de Sub Air Filter, is attached to air filter i must get it?

thanks for the help i see other say the carbs must be raise in low but i want more info about the PAIR valve on this model

my bike is a cbr 919rr 1996

< Message edited by yolio -- 8/2/2007 11:09:35 AM >

Post #: 1

RE: afterburn problem - 8/2/2007 1:07:48 PM

gixxereater

Posts: 1489
Joined: 5/23/2006
Status: offline

You dont have a PAIR valve on this bike.

_____________________________

Ambition is a poor excuse for not having enough sense to be lazy

(in reply to yolio)

Post #: 2

RE: afterburn problem - 8/2/2007 2:29:12 PM

yolio

Posts: 39
Joined: 6/12/2007
Status: offline

this is part of manual, i dont believe this model have a Pair valve but later of see the manual go out to look at bike and yes, is there, as soon as i can will take a pic fo system already mounted on bike

< Message edited by yolio -- 8/2/2007 2:35:46 PM >

(in reply to gixxereater)

Post #: 3

RE: afterburn problem - 8/4/2007 6:59:55 PM

yolio

Posts: 39
Joined: 6/12/2007
Status: offline

i already disable the secondary air system and afterburn as gone
change the cct for an APE and no more noise, other problem was the bike dont go more of 9k rpm now with new cct can take it to red line without problem

i will post pics the monday

(in reply to yolio)

Post #: 4

RE: afterburn problem - 8/4/2007 7:41:59 PM

Flamed900RR

Posts: 68
Joined: 4/8/2007
Status: offline

Hey where and how do I get a copy of that manual!?

(in reply to yolio)

Post #: 5

RE: afterburn problem - 8/6/2007 6:47:09 AM

yolio

Posts: 39
Joined: 6/12/2007
Status: offline

here is the pics that probe the cbr919 california model have a PAIR valve, its called "Secondary Air Supply System"

the solution, at least while found something for block the tubes