CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

Dies when I put it in gear?

  Printable Version
CBR Forum >> Past CBR Models >> CBR 900RR >> Dies when I put it in gear? Page: [1]
Login
Message << Older Topic   Newer Topic >>
Dies when I put it in gear? - 2/16/2005 8:59:01 AM   
bwhittington00


Posts: 28
Joined: 1/19/2005
Status: offline
bwhittington00's photo gallery
So I went out to ride my bike around the block last. Stopped and got the mail, got back on my bike, pulled in clutch, put the bike in gear and the bike died. I did this a few time before pushing it home. It almost sounds like the clutch is not pulled in when I'm doing it, could it be a clutch adjustement?
Post #: 1
RE: Dies when I put it in gear? - 2/16/2005 10:30:34 AM   
NeonspeedRT


Posts: 1468
Joined: 9/2/2004
From: Jax, FL
Status: offline
NeonspeedRT's photo gallery

Probably your sidestand safety switch went out. Mine was aparently going out for awhile and causing the bike to act funny, then it totally died. I replaced it and the bike runs like a champ. I think the part was like $59 from Ron Ayers website. My local Honda dealer matched their price and I had it in 2 days. You can bypass the switch as well. If you pull up your seat, you can see where the switch connects. It has a green plug with 3 wires. I'm at work right now, so I don't know the colors off the top of my head. I took a paperclip and stuck it into the first and last connector to bypass the switch. The bike fired right up and ran in gear. Thats how I knew it was the switch.

_____________________________

MSF Rider Coach
www.anmsafetycourse.com

"Riding a motorcycle is like playing chess. Anyone can learn the moves, but it takes a lifetime to master the game."

(in reply to bwhittington00)
Post #: 2
RE: Dies when I put it in gear? - 2/16/2005 11:45:37 AM   
bwhittington00


Posts: 28
Joined: 1/19/2005
Status: offline
bwhittington00's photo gallery
Will the bike still start fine if that is the problem?
It start just fine and sounds good, just when I put it in gear it dies. That's why I thought it was a clutch issue. I just bought the bike and the guy gave me the receipt for the new clutch he just put in. I will try the swithch and see, just wondering if your bike ran fine when that was the problem?

(in reply to NeonspeedRT)
Post #: 3
RE: Dies when I put it in gear? - 2/16/2005 12:29:33 PM   
L8X


Posts: 1909
Joined: 12/19/2004
Status: offline
L8X's photo gallery
yeah, i'd bet on the sidestand.

(in reply to bwhittington00)
Post #: 4
RE: Dies when I put it in gear? - 2/16/2005 1:40:44 PM   
NeonspeedRT


Posts: 1468
Joined: 9/2/2004
From: Jax, FL
Status: offline
NeonspeedRT's photo gallery

The bike will run like a champ in neutral. You can rev it, it sounds just fine. As soon as you put it in gear, it just dies. It will sit there and idle or rev all day long with the bike in neutral. As soon as you put it in gear, dead. Perfect description of the sidestand switch. It's not hard to replace at all. I think it took me 30 minutes to do. If you need to ride the bike in the meantime, just bypass the sidestand switch. It will work fine, your neutral light will stay on, but it will go into gear just fine with the switch bypassed.

_____________________________

MSF Rider Coach
www.anmsafetycourse.com

"Riding a motorcycle is like playing chess. Anyone can learn the moves, but it takes a lifetime to master the game."

(in reply to L8X)
Post #: 5
RE: Dies when I put it in gear? - 2/18/2005 5:52:37 PM   
bwhittington00


Posts: 28
Joined: 1/19/2005
Status: offline
bwhittington00's photo gallery
It was the kickstand, thanks everyone.

(in reply to NeonspeedRT)
Post #: 6
RE: Dies when I put it in gear? - 9/3/2007 12:25:10 PM   
gicon

 

Posts: 3
Joined: 9/3/2007
Status: offline
ok.. similar problem here.. I'm helping a friend rebuild his 97 600 f3..  keep in mind.. I'm not savy in repairing bikes by any means..

So.. to the problem and steps ahed of it..  my friend acquired this bike from a methhead..  who has absolutely destroyed the wiring in it.. we're talking speaker wire for wiring..  needless to say.. the bike finally friend the wiring and the voltage rectifier...  we have since replaced the rectifier and the entire wiring harness..  however.. after doing so..  the bike has the exact same symptoms as described above.. runs great in neutral, revs, the whole nine yards.. however.. when we put it into gear. the bike just dies..  I've locating this switch.. however.. it seems to be MIA...  we have the plug on the wiring harness (the green plug with three connections)   Where is this kickstand switch located??  and would the wiring to bridge the switch be the same on the 600f3 as the 900??  Thanks in advance.. I'll continue my search in locating material that can shed some light on the switches location.. hopefully someone can shed some light for me soon.        

(in reply to bwhittington00)
Post #: 7
RE: Dies when I put it in gear? - 9/3/2007 6:35:42 PM   
kodiak1122



Posts: 1666
Joined: 7/31/2006
From: Columbus, Ohio
Status: offline
kodiak1122's photo gallery
gicon, welcome to the forum.

Sounds like your friend needs a manual.
Manuals can be downloaded here -> Click Here 
Look on page 1-24 for switch, wiring and connector location.
The kickstand switch can be found near the kickstand.
Replace all speaker wiring if there are no speakers on the bike. .

(in reply to gicon)
Post #: 8
RE: Dies when I put it in gear? - 9/3/2007 7:03:15 PM   
TheX



Posts: 3829
Joined: 12/17/2006
From: Austin TEXAS
Status: online
TheX's photo gallery
Tweekers do some amazing things.

_____________________________

My opinions may have changed, but not the fact that I am right.

(in reply to kodiak1122)
Post #: 9
RE: Dies when I put it in gear? - 9/4/2007 12:23:31 PM   
gicon

 

Posts: 3
Joined: 9/3/2007
Status: offline
thanks.. I found the location of the switch based from a manual for a CA model online.. good old picture pdf..  can't search. .but it did the job..  thanks for the links for the manual..  I have it opened in another tab.. but havn't looked at it yet mate..  I've already replaced all the speaker wire with installing the new wiring harness...   what A nightmare the old one was..  I sure wish i took pictures.. I'm sure you guys would have had a blast seeing them... 

However.. It's my understanding that you can bypass the switch altogether.. can anyone shed some light on how to go about doing so with this bike? (cbr 600 f3)

thanks in advance :D  

(in reply to kodiak1122)
Post #: 10
RE: Dies when I put it in gear? - 9/4/2007 3:33:37 PM   
gicon

 

Posts: 3
Joined: 9/3/2007
Status: offline
better yet.. he talked him into being smart.. we ordered the kick stand switch and it shoudl be here by friday... here's to having this 600 back on the road come saturday :)  Thanks for the help guys.. I'll post up again if we still have problems.        

(in reply to gicon)
Post #: 11
RE: Dies when I put it in gear? - 9/4/2007 3:43:06 PM   
TheX



Posts: 3829
Joined: 12/17/2006
From: Austin TEXAS
Status: online
TheX's photo gallery
Post pics of the success story when it's on the road.

_____________________________

My opinions may have changed, but not the fact that I am right.

(in reply to gicon)
Post #: 12
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
CBR >> Past CBR Models >> CBR 900RR
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl7187
doncollins6264
tahoe sc5876
rrasco5623
pitsvtec5323
d2vw14_205103
tk954rr4975
vpsophmore4735
chainstretch4581
blue fox4577

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.