RE: wiring

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

RE: wiring

Printable Version

CBR Forums >> Racing and Recreational >> Stunters Corner >> RE: wiring

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: wiring - 8/21/2007 3:54:00 PM

JZHALES

Posts: 1569
Joined: 7/30/2006
Status: offline

not everyone rocks 06 1000RRs some of us have crunchy bikes with things missing, taken off, usualy snapped off, or zip tied on. i wouldnt have it any other way

_____________________________

my bike has character

(in reply to Err)

Post #: 16

RE: wiring - 8/25/2007 8:25:19 AM

SoRAD

Posts: 116
Joined: 1/20/2007
Status: offline

i dont remember what wires i cut and connected, but i bypassed the tip over sensor on the main harness under the seat. so now the only wires i have up front is for the low beam. but i have that tucked and ziptied to the cross bar behing the neck of the frame. you cant see a thing. the only wires you see are from the ignition. if you dont want to trim down your entire harness then run the connectors for your tach and lights through the small space between the radiator (the two brackets on top of the radiator) and neck of your frame. it moves the wires from the side of your frame for a cleaner look.

_____________________________

www.ruffryderssanjose.com
www.alloutindustries.com <---race stunt track 50s

(in reply to JZHALES)