yoshi rs-3 slipon - have a ? about a noise (Full Version)

CBR >> Past CBR Models >> CBR 600F3

yoshi rs-3 slipon - have a ? about a noise

  

busyychild -> yoshi rs-3 slipon - have a ? about a noise (8/21/2007 9:55:32 AM)

when in first and second gears in low rpms, with a little throttle when cruising around the exaust makes a sound like its a harley.  its a low, almost studdering/popping sound.  it doesnt seem to affect perfomance at all, just sounds odd.  once i get on the throttle the studdering sound goes away and a nice consistant tone takes its place.  i just wanted to know if this is a common sound for our yoshi pipes.  if i can get a chance ill post up the sound.  i bought the bike used with the slipon already installed. 

it has had its plugs changed, carbs cleaned, jetted and synced, air and fuel filters replaced.

  
madmike01uk -> RE: yoshi rs-3 slipon - have a ? about a noise (8/21/2007 12:38:39 PM)

how low are the RPM's?

busyychild -> RE: yoshi rs-3 slipon - have a ? about a noise (8/21/2007 1:19:25 PM)

maybe 1-2k, ill have to check today on my way home from work, i have a garage that i have to drive in low rpms in.

madmike01uk -> RE: yoshi rs-3 slipon - have a ? about a noise (8/21/2007 1:49:33 PM)

sounds normal to me, as long as it goes away when the revs go up I wouldn't worry. I take it the exhaust baffles have been removed.

busyychild -> RE: yoshi rs-3 slipon - have a ? about a noise (8/21/2007 1:51:43 PM)

i dont know, it doesnt look as if anyone had the can open, unless you can remove the baffles w/o taking it all apart.

madmike01uk -> RE: yoshi rs-3 slipon - have a ? about a noise (8/21/2007 2:00:06 PM)

some of them just have a screw under the outlet pipe right at the end of the exhaust, you unscrew it and then can pull the baffles out with some pliers. You can't do it on my scorpion (which is a shame) but then again it keeps the police off of my case.

buddah -> RE: yoshi rs-3 slipon - have a ? about a noise (8/21/2007 8:40:36 PM)

I just got an rs3 in carbon fiber----haven't installed it yet but I'll let you know what happens when I do

busyychild -> RE: yoshi rs-3 slipon - have a ? about a noise (8/22/2007 6:40:08 AM)

the popping noise/tone is most prominent around 4.5k rpms in second gear, it happens when decelerating then holding around those rpms.  im sure its nothing, i just want to make sure everything is copacetic.

DDCavi -> RE: yoshi rs-3 slipon - have a ? about a noise (8/22/2007 9:46:39 AM)

I wouldnt worry about it, sounds similar to the way mine was. Now cut that bitch down to 10"s and go bother people.[:D]

busyychild -> RE: yoshi rs-3 slipon - have a ? about a noise (8/22/2007 10:33:24 AM)

quote:

ORIGINAL: DDCavi

I wouldnt worry about it, sounds similar to the way mine was. Now cut that bitch down to 10"s and go bother people.[:D]


thats the plan [:D], just have to pop the rivits out.  it will be my winter project, among other things.

Hershey -> RE: yoshi rs-3 slipon - have a ? about a noise (8/22/2007 10:38:26 AM)

I've got a Hindle, and mine does the same, it's just the decompression of the engine blasting through the pipe.

Ever heard a semi-truck open up its "Jake Brake" ?

busyychild -> RE: yoshi rs-3 slipon - have a ? about a noise (8/22/2007 1:28:02 PM)

quote:

ORIGINAL: Hershey

I've got a Hindle, and mine does the same, it's just the decompression of the engine blasting through the pipe.

Ever heard a semi-truck open up its "Jake Brake" ?


it does sound similar, but i can ride it the whole time with neutral throttle , it only goes away on positive or negative throttle,

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.