'93 chain tensioner part # ?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

'93 chain tensioner part # ?

Printable Version

CBR Forum >> Past CBR Models >> CBR 1000F "Hurricane" >> '93 chain tensioner part # ?

Page: [1]

Message

<< Older Topic Newer Topic >>

'93 chain tensioner part # ? - 9/9/2007 9:04:44 PM

Nevada Fred

Posts: 36
Joined: 10/17/2006
From: Reno, Nevada
Status: offline

Hello, does anyone have the part number for the "good" cam chain tensioner for a 1993? Ron Ayers has #14500-M21-000 is this correct?
Thank you for any help. I am fixing up my CBR but I got a pristine 99 Blackbird with 14K on the clock. What a sweet ride and a TON of power, but I am keeping the F and will just tuck her in a bit.
Fred

Post #: 1

RE: '93 chain tensioner part # ? - 9/10/2007 12:38:03 PM

idodirt

Posts: 768
Joined: 8/14/2006
From: South Florida, USA
Status: offline

If I was replacing the CCT, I'd replace the slipper as well, it's what the tensioner pulls against the chain with. I used to have the classic noisy CCT from under the hood while idiling. It's been quiet ever since. I've put about 10K miles on it and still quiet.

CCT 14500-MZ1-000 $103.10
Slipper 14510-MM5-640 $31.02

(in reply to Nevada Fred)

Post #: 2

RE: '93 chain tensioner part # ? - 9/10/2007 8:18:52 PM

Nevada Fred

Posts: 36
Joined: 10/17/2006
From: Reno, Nevada
Status: offline

Thank you, that is what I will get.
Fred

(in reply to Nevada Fred)

Post #: 3

RE: '93 chain tensioner part # ? - 9/10/2007 8:52:14 PM

idodirt

Posts: 768
Joined: 8/14/2006
From: South Florida, USA
Status: offline

While you're in there, you might as well adjust the valves too. Malboja did an excellent write up with a how-to. Lots of pictures.

http://www.cbrforum.com/m_364190/tm.htm

(in reply to Nevada Fred)

Post #: 4