CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

Road Paint!?!?!?

  Printable Version
CBR Forums >> This 'n' That >> Detailing >> Road Paint!?!?!? Page: [1]
Login
Message << Older Topic   Newer Topic >>
Road Paint!?!?!? - 10/4/2007 6:28:32 AM   
Rocfrog

 

Posts: 50
Joined: 7/30/2006
Status: offline
Apperantly I was following some one that drove thru fresh road paint (stripes on the hwy) and splattered it on the front of my bike! There's not a lot it's just a couple of small dots but on a blue bike the white paint stands out! I tried to get it off useing a claybar and only some of the lighter/smaller spots came off. What do you guys suggest to get the rest of it off with?

Nick
Post #: 1
RE: Road Paint!?!?!? - 10/4/2007 6:43:09 AM   
05RR


Posts: 502
Joined: 10/16/2005
Status: offline
05RR's photo gallery
I'd try using a belt sander...jkjkjk, DON'T do that! lol...try out a professional grade rubbing compound (use a good buffer if you have one) and then finish it with a coat of wax.

(in reply to Rocfrog)
Post #: 2
RE: Road Paint!?!?!? - 10/4/2007 7:00:49 AM   
TENNBANSHEE

 

Posts: 143
Joined: 8/15/2007
Status: offline
TENNBANSHEE's photo gallery
angle grinder   you can try some stuff called "goof off".  You will have to wax afterwards.

(in reply to Rocfrog)
Post #: 3
RE: Road Paint!?!?!? - 10/4/2007 8:10:35 PM   
Rocfrog

 

Posts: 50
Joined: 7/30/2006
Status: offline
What would be a "professional grade" claybar????

I was going to try "Goof off" but was afraid it would eat the plastic!

Nick 

(in reply to TENNBANSHEE)
Post #: 4
RE: Road Paint!?!?!? - 10/5/2007 5:08:04 AM   
TAT2D

 

Posts: 34
Joined: 3/25/2007
Status: offline
TAT2D's photo gallery
I would be more inclined to use laquer thinner than goof off. The goof off seems to damage stuff easier than laquer thinner does. I use the thinner on all kinds of stuff (auto paint and plastic, really gunked up cycle wheels, etc.). As long as you don't keep the same spot too wet, too long it shouldn't mess anything up. I wouldnt use it on stickers or graphics though. A lot of the older hondas have un-cleared paint on them, so test first. My red, white, and blue 900 rr has the blue on the rear plastics and front fender without clearcoat.
The claybar usually does the trick, I'm surprised it didn't. You can get the clay in different abrasive levels, maybe a rougher one might do it. You'll have to buff afterwards.

Good luck,
B

(in reply to Rocfrog)
Post #: 5
RE: Road Paint!?!?!? - 10/5/2007 5:55:59 AM   
Rocfrog

 

Posts: 50
Joined: 7/30/2006
Status: offline
Laquer Thinner!!!! Wow I would have NEVER thought to use that to get this off of the paint. Maybe to take all the paint off. I think next week I'll see about swing by the body supply shop and see what they have/ suggest but in the mean time I'll try a small amount of laquer thinner and then maybe the goof off and go from there.

Thanks for all the sugestiong guys I'll let you know how it turns out!

Nick

(in reply to TAT2D)
Post #: 6
RE: Road Paint!?!?!? - 10/5/2007 7:25:20 AM   
TAT2D

 

Posts: 34
Joined: 3/25/2007
Status: offline
TAT2D's photo gallery
As long as your bike isn't painted with laquer(very rarely used anymore), it shouldnt be a problem. Just try to keep the rag on the stuff you are trying to get off. If you rub on your bike paint in one spot too long it will eventually start to damage it.

(in reply to Rocfrog)
Post #: 7
RE: Road Paint!?!?!? - 10/8/2007 1:08:01 PM   
thomasintexas

 

Posts: 398
Joined: 9/24/2007
Status: offline
thomasintexas's photo gallery
try orange chronic!
that stuff will clean EVERYTHING~!

its basically isopropyl alcohol and sea salt.....but it sure does the trick!

*available at ANY head shop*
I use it to keep all my metal shiny....works GREAT on aluminum....

(in reply to TAT2D)
Post #: 8
RE: Road Paint!?!?!? - 10/8/2007 2:45:59 PM   
Rubicon on 38s


Posts: 176
Joined: 9/5/2007
Status: offline
quote:

ORIGINAL: thomasintexas

try orange chronic!
that stuff will clean EVERYTHING~!

its basically isopropyl alcohol and sea salt.....but it sure does the trick!

*available at ANY head shop*
I use it to keep all my metal shiny....works GREAT on aluminum....



"Orange Chronic"?  Available at head shops?
I'm guessing its made to clean burnt seven-leaf plant resin off of glass. Just a hunch. 

_____________________________

1996 CBR 900RR


(in reply to thomasintexas)
Post #: 9
RE: Road Paint!?!?!? - 10/12/2007 9:55:47 AM   
thomasintexas

 

Posts: 398
Joined: 9/24/2007
Status: offline
thomasintexas's photo gallery
quote:

ORIGINAL: Rubicon on 38s

quote:

ORIGINAL: thomasintexas

try orange chronic!
that stuff will clean EVERYTHING~!

its basically isopropyl alcohol and sea salt.....but it sure does the trick!

*available at ANY head shop*
I use it to keep all my metal shiny....works GREAT on aluminum....



"Orange Chronic"?  Available at head shops?
I'm guessing its made to clean burnt seven-leaf plant resin off of glass. Just a hunch. 


hmmmm i have no idea what youre reffering to....

(in reply to Rubicon on 38s)
Post #: 10
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
CBR Forums >> This 'n' That >> Detailing
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl6243
doncollins6227
tahoe sc5798
pitsvtec5318
rrasco4875
d2dgraphix_64673
blue fox4296
vpsophmore4188
havoc4009
chainstretch3965

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.