F2 Modified with F3 96-98 Fairing

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

F2 Modified with F3 96-98 Fairing

Printable Version

CBR Forums >> Past CBR Models >> CBR 600F2 >> F2 Modified with F3 96-98 Fairing

Page: [1] 2 3 next > >>

Message

<< Older Topic Newer Topic >>

F2 Modified with F3 96-98 Fairing - 12/7/2007 10:28:37 AM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

Hi can anyone help I have a 1994 CBR 600 F2 which was recently in a smash. Due to people not putting enough of these parts on ebay i came to the conclusion on purchasing the F3 Repsol kit (as picture shows, which will come in 3 boxes). I spoke to one guy who all he says i needed was a headlight and a different windscreen. So i got them, just waiting on the parts now to get me bike back on the road.

But!!!!..always a but.
I recieved one box which included the rear 2 panels (the seat part)..
I noticed the panel has a curve for the rear tail light..which mine doesnt have. Does this mean I need to have a different rear tail light?

Help needed asap...
Do i need a rear light,seat etc... before the rest of this kit comes.

Thanks in advance.

Attachment (1)

Post #: 1

RE: F2 Modified with F3 96-98 Fairing - 12/7/2007 10:47:07 AM

rsp919

Posts: 637
Joined: 8/6/2006
Status: offline

Yes, you will need an f3 tail light. The seat should be the same if I remember right.

_____________________________

94 f2 frame
nws one-off singlesided swingarm
06 gsxr 750 front forks
98 cbr900rr motor
one-off red carbon bodywork
one-off r6 style upper to mount to oem lowers
996 tail on one-off aluminium subframe and led tail

(in reply to EwOkIE)

Post #: 2

RE: F2 Modified with F3 96-98 Fairing - 12/7/2007 11:03:34 AM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

Hi and thanks for replying. Cant i use this tail light just for now?

And nice bike you have. wanna swap?

(in reply to rsp919)

Post #: 3

RE: F2 Modified with F3 96-98 Fairing - 12/7/2007 11:43:14 AM

plastikmelter

Posts: 106
Joined: 11/30/2005
From: Virginia
Status: online

thats gonna be a great look once you get it assembled. good luck!

(in reply to EwOkIE)

Post #: 4

RE: F2 Modified with F3 96-98 Fairing - 12/7/2007 12:14:01 PM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

THANKS...just gotta know if I can get away with putting the old rear light on it till I get the proper one for it.
Or if I need anything else.
Let you know.....

(in reply to plastikmelter)

Post #: 5

RE: F2 Modified with F3 96-98 Fairing - 12/9/2007 10:50:29 AM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

UPDATE!... Had to buy another seat FW from ebay as the one I have doesnt go round the tank.
Need to get a light

....
Is there anything else for me to get this damn kit on me bike....rubber,plastics etc?

1994 CBR600 F2 Supersport
Installing REPSOL Kit 1996-98

Attachment (1)

< Message edited by EwOkIE -- 12/9/2007 10:53:47 AM >

(in reply to EwOkIE)

Post #: 6

RE: F2 Modified with F3 96-98 Fairing - 12/10/2007 8:38:06 PM

ynks4evr

Posts: 338
Joined: 5/9/2007
From: neptune, nj
Status: offline

you should be good with the seat ant taillight, post up pictures when you get it all on... Ive been eying up one of those kits for a few months, is it one of thoes ones that are shipped from china?

_____________________________

95 f3
Yoshi slip-on

(in reply to EwOkIE)

Post #: 7

RE: F2 Modified with F3 96-98 Fairing - 12/13/2007 9:27:20 AM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

Yes Its the one from China... heres the snags..
Fitting this 96-98 Repsol fairing to my CBR FR model (1994)

1. When fitting the headlamp with the upper fairing the sides that go against the clocks is about a few cm away from the lip.
2. Do I need a new front bracket? as when i put the screen/visor in the holes (mirrors) dont match up to the existing holes on the
bracket.
3.The front mudguard looks to tight to fit over the front wheel, not the same as the existing one.
4.the back rear panels go over a few inches at the rear, so you may need another grab rail.

Thanks

Help please as i have parts all over the place.
Be aware that you may need extra bolts and screws etc.. to fit these kits as you run out of the existing ones.

< Message edited by EwOkIE -- 12/13/2007 9:31:22 AM >

(in reply to ynks4evr)

Post #: 8

RE: F2 Modified with F3 96-98 Fairing - 12/13/2007 11:58:26 AM

Hershey

Posts: 668
Joined: 7/27/2007
Status: offline

Some of that can be blamed on cheap Chinese quality, for bad fitup :(

Good luck man, I know not to buy one of those kits now!

(in reply to EwOkIE)

Post #: 9

RE: F2 Modified with F3 96-98 Fairing - 12/14/2007 5:49:05 AM

bindelsf2

Posts: 1329
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

the f2 seat should work but there will be a gap so the best bet is the f3 like you did and the taillight and bracket will have to be from the F3..

check out my pics of the tail

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

(in reply to Hershey)

Post #: 10

RE: F2 Modified with F3 96-98 Fairing - 12/14/2007 4:34:28 PM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

Thanks for the info,but how do I solve the problem with the front fairing, will try and post pictures.

Oh!! Do i need the rubbers for the grabrail will mine fit it??

Help on anything?

< Message edited by EwOkIE -- 12/14/2007 4:38:00 PM >

(in reply to bindelsf2)

Post #: 11

RE: F2 Modified with F3 96-98 Fairing - 12/28/2007 6:28:39 AM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

Just got the seat and my camera is broken so cant upload pictures of front bracket for the headlight, as it currently sits down a slight bit and outwards.

Any help please let me know.

(in reply to EwOkIE)

Post #: 12

RE: F2 Modified with F3 96-98 Fairing - 1/4/2008 12:22:51 PM

EwOkIE

Posts: 63
Joined: 10/25/2007
Status: offline

Right kits on, finally!!!
But , yes theres always a but!...Front headlight fairing is on but not 100%..say 80%, the 2 plugs either side of the headlight arent fully secure in but are holding and all bolt holes for the surrounding fairing are on with no probs. Leaves a slight gap where the fasten clips to the centre section.

The holes on the F2 fairing bracket which the mirrors go on I had to make 2 additional holes for the visor and upper fairing to sit perfectly. Word of warning when doing this make sure fairing is off the bike!!!! I nearly had a close encouter.

So all in all kit is on, will post pics once I get some odds and ends for bike, such as i need the grab rail cant get one on ebay for some reason there like gold dust i reckon.

Later guys let you all know.

(in reply to EwOkIE)

Post #: 13

RE: F2 Modified with F3 96-98 Fairing - 1/4/2008 12:59:27 PM

amanc96

Posts: 52
Joined: 12/16/2007
Status: offline

subscribed! i'm interested in seeing some pics when you get them. I'm interested in changing to f3 fairings soon.

< Message edited by amanc96 -- 1/4/2008 1:02:52 PM >

(in reply to EwOkIE)

Post #: 14