RE: How to install a slip on?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

RE: How to install a slip on?

Printable Version

CBR >> Current Honda CBR Models >> 1000 Modifications >> RE: How to install a slip on?

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: How to install a slip on? - 1/6/2008 1:48:52 PM

baxsom

Posts: 1348
Joined: 6/28/2006
Status: offline

you can get a pc3 for about 250ish

500 for the unit, install and custom map is pretty good considering a custom map is on an average of 300 bucks. however there are a lot of shops that call a downloaded map a custom one and dont really fine tune it.

install is easy taking maybe an hour tops. the included instrcutions are top notch and for this pipe there are a lot of real good maps available for it that will get you within maybe a half a point or two of being perfect on the air fuel

my opinion is get the pc3 and try a few of the downloaded ones

normally i feverishly recommend a custom map is always the best way to go but there are so many custom maps available for the sato that there is always one that will be close enough to make it run decently enough until you can get one of your own

_____________________________

street-2006 1KRR,
track-07 600RR

yes, i guess maybe i can be a jerk, but i am tired of reading the same questions and hearing the same would be experts give out wrong info.

(in reply to sweetdeal)

Post #: 16

RE: How to install a slip on? - 1/7/2008 8:51:32 AM

mihomie

Posts: 122
Joined: 6/18/2007
Status: offline

$250 to $260 including shipping. ebay has a few stores that run this price all the time.

install it yourself. it will take an hour and a half if you really drag your feet and goof around. it is the easiest thing i have installed, all plug and play.

as for maps i run a map from kyle racing that they sent directly to me. but like baxsom pointed out there are tons of good maps that can be downloaded for free from others here.

(in reply to baxsom)

Post #: 17