Galfer brake lines

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Galfer brake lines

Printable Version

CBR Forum >> Current Honda CBR Models >> CBR 1000RR >> Galfer brake lines

Page: [1]

Message

<< Older Topic Newer Topic >>

Galfer brake lines - 1/10/2008 12:27:13 AM

engineer1c

Posts: 7
Joined: 7/2/2006
Status: offline

I just got my galfer lines for the clutch, front brakes, and rear brake. But the fronts are only 2 lines, don't they include one that runs from the master? Seems silly not too, right? Or should I custom order a line, or do I even need one from there? Thanks

Post #: 1

RE: Galfer brake lines - 1/10/2008 4:53:50 AM

cozye

Posts: 86
Joined: 4/12/2006
Status: offline

You should have two lines that run from the master cylinder to the calipers, a seperate line for the clutch, and a seperate line for the rear if you got all 3 kits.

(in reply to engineer1c)

Post #: 2

RE: Galfer brake lines - 1/10/2008 5:30:18 AM

gixxereater

Posts: 1492
Joined: 5/23/2006
Status: offline

+1. There SHOULD be two lines for the front. It will do away with the single line to the right caliper and one over the fender (likely). Two is correct for the front.

_____________________________

Ambition is a poor excuse for not having enough sense to be lazy

(in reply to cozye)

Post #: 3

RE: Galfer brake lines - 1/10/2008 2:39:08 PM

yarbrouc

Posts: 191
Joined: 1/7/2008
Status: offline

Just run both from the master. One will go to the right caliper and one to the left. It does away with the line that runs over the fender. You can even take that mount off on the fender.

(in reply to gixxereater)

Post #: 4