RE: WOT throttle angle... is it not suppoed to be 90 degrees?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

RE: WOT throttle angle... is it not suppoed to be 90 degrees?

Printable Version

CBR >> Past CBR Models >> CBR 600F2 >> RE: WOT throttle angle... is it not suppoed to be 90 degrees?

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: WOT throttle angle... is it not suppoed to be 90 de... - 2/4/2008 12:27:29 PM

SpecR

Posts: 308
Joined: 10/19/2007
Status: offline

I have a D&D slip-on that came with my good engine/no-title frame (he never sent it), and a K&N filter that I took off my bad engine. I haven't popped the carbs open to look at the jets...

But the suspension looks stock to me (I don't think my front shocks are actually from a 94, since there's no markings for the damper adjustments). And the rear shock has the stock black spring and shock. (no Racetech goodies for me)

Also, I have about three different throttle inserts from three different bikes, and they all look the same.

Wait a minute, I think the throttle grip I'm using might have actually come from a race bike, since it came with a bunch of parts on eBay, including some calipers (that I'm not using at the moment) that have drilled, aftermarket banjo bolts.. but I'm still fairly sure they all looked the same. I can't imagine how you could use the stock throttle housing and decrease the twist degrees, without some sort of modifications to it.

(in reply to spdbump36)