CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

A few new mods completed

  Printable Version
CBR Forums >> Current Honda CBR Models >> CBR 600RR >> A few new mods completed Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
A few new mods completed - 1/13/2008 7:01:45 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
despite the bad news on my helmet (some of you may have read that thread), i have a new fender eliminator, windshield, rear spools and front signals installed on my tricycle.  here are a few pics (bike is dirty as all hell, i know):







_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!
Post #: 1
RE: A few new mods completed - 1/13/2008 7:04:01 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
stock exhaust doesn't look too hot, i know, but i'm not made of money, so hopefully a new exhaust soon.  the pics would have looked better if i had the back seat on, but i had some silicone setting on the tail light.

_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!

(in reply to Papi Chingon)
Post #: 2
RE: A few new mods completed - 1/13/2008 7:05:56 PM   
sixhundredrr


Posts: 2334
Joined: 6/22/2007
Status: offline
sixhundredrr's photo gallery
Love the license plate. 


_____________________________

I vouch for 03yellow600RR. Good buyer.

I vouch for svtsnake. Good seller.

www.dogsrule.com

(in reply to Papi Chingon)
Post #: 3
RE: A few new mods completed - 1/13/2008 8:05:34 PM   
Tacoma25


Posts: 541
Joined: 11/11/2007
Status: offline
I like the integrated tail light on the bike. Say, how recently have you checked the condition of the ball joints on your truck?

(in reply to sixhundredrr)
Post #: 4
RE: A few new mods completed - 1/13/2008 8:16:53 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
"Love the license plate."


thanks, that kit mounts it just right without tucking it too much, so that's why i chose it.


"Say, how recently have you checked the condition of the ball joints on your truck?"


the truck sits on airbags, so it probably looks a bit funny right now at that angle since it's "squatting."

_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!

(in reply to Tacoma25)
Post #: 5
RE: A few new mods completed - 1/13/2008 8:54:21 PM   
Martin_D


Posts: 1663
Joined: 12/15/2007
Status: offline
Where did you get the tail from? Looks Hot!!!!

(in reply to Papi Chingon)
Post #: 6
RE: A few new mods completed - 1/13/2008 9:11:45 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
"Where did you get the tail from?"


the tail is bone stock, but the fender was removed and replaced with the tripageled.com's fender eliminator kit.  this kit wasn't made for the stock exhaust, which is what i have, but it looks a hell of a lot better now than it did.  i still have the heat shields on there, so it kind of looks stupid up close, but from a distance it looks pretty sweet.

fyi, this fender eliminator kit also has the mount bracket to tuck the plate and a rear hugger that has led lights in it to illuminate the plate, which i think is pretty trick.

_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!

(in reply to Martin_D)
Post #: 7
RE: A few new mods completed - 1/13/2008 9:15:02 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
^^^when i said it wasn't made for the stock exhaust, i meant that it fits just fine, but looks way better with after market exhaust.

_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!

(in reply to Papi Chingon)
Post #: 8
RE: A few new mods completed - 1/13/2008 9:32:49 PM   
Martin_D


Posts: 1663
Joined: 12/15/2007
Status: offline
Ok, so the integrated lights just screw in the tail or what?

Sorry if it seems like a noob question or something, just really interested in it, and cant figure it out.

(in reply to Papi Chingon)
Post #: 9
RE: A few new mods completed - 1/13/2008 9:36:41 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
no, you have to cut away the tail to install it.  it's the 05-06 taillight, but it's been modified to fit in that part of the tail section (after it's cut).  the blinkers are integrated into it too.

_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!

(in reply to Martin_D)
Post #: 10
RE: A few new mods completed - 1/13/2008 9:40:24 PM   
Martin_D


Posts: 1663
Joined: 12/15/2007
Status: offline
ohhh, alright. It looks awesome. I think i would be rather scared to cut my tail though. You do yours yourself?

(in reply to Papi Chingon)
Post #: 11
RE: A few new mods completed - 1/13/2008 9:49:40 PM   
Papi Chingon


Posts: 351
Joined: 11/4/2007
Status: offline
nope, i had someone else do it.  i'm not mechanically inclined, let alone confident enought to cut my own bike....i can barely set the radio stations in my car

_____________________________

sex panther - it''s made with real bits and pieces of panther, so you know it''s good! 60% of the time, it works EVERYTIME!!!

(in reply to Martin_D)
Post #: 12
RE: A few new mods completed - 1/14/2008 1:00:05 AM   
chris99


Posts: 88
Joined: 10/19/2007
From: Plantation, FL
Status: offline
nice pit in ur sig. Like the front signals. I would suggest cutting the heat shield closer to the fender for a cleaner look till u get an exaust. I got a dremmel and did it myself and it looks so much better. Nice bike

(in reply to Papi Chingon)
Post #: 13
RE: A few new mods completed - 1/14/2008 6:04:29 AM   
isolated1523

 

Posts: 915
Joined: 11/7/2005
From: Clarksville, TN
Status: offline
isolated1523's photo gallery
Yup, definitely cut or lose the heat shield, polish that pipe up, and don't worry about it!!!





-Adam


_____________________________


Voodoochyls Wisdom: "I would like to give you a "Dances with Wolves" Indian name...I dub thee "Snipes with a Fist".

(in reply to chris99)
Post #: 14
RE: A few new mods completed - 1/14/2008 5:33:54 PM   
Tacoma25


Posts: 541
Joined: 11/11/2007
Status: offline
You have all sorts of sweet stuff on all your rides then. Nice job....

(in reply to isolated1523)
Post #: 15
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2   next >   >>

 
CBR Forums >> Current Honda CBR Models >> CBR 600RR
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl7168
doncollins6257
tahoe sc5874
rrasco5615
pitsvtec5323
d2vw14_205095
tk954rr4900
vpsophmore4719
blue fox4575
chainstretch4558

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.