bolts

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

bolts

Printable Version

CBR Forum >> Honda CBR Forum Sponsors >> TRG Coating >> bolts

Page: [1]

Message

<< Older Topic Newer Topic >>

bolts - 1/18/2008 11:30:26 AM

rdrink25

Posts: 51
Joined: 5/16/2007
Status: offline

how much per bolt and does is change the size so much that i would not be able to get an allen wench in to fit i am looking to do about 50 bolts

Post #: 1

RE: bolts - 1/20/2008 5:19:18 PM

TRGcoating

Posts: 192
Joined: 11/9/2005
Status: offline

Bolts i usually charge about $1 each. WIth an allen head shouldnt be a problem, its hex bolts etc that there would be a problem.

_____________________________

http://www.TRGcoating.com - High quality powder coating at the most affordable prices.

(in reply to rdrink25)

Post #: 2

RE: bolts - 1/21/2008 7:25:18 AM

CBR1000

Posts: 301
Joined: 3/20/2007
From: Missouri
Status: offline

quote:

ORIGINAL: TRGcoating

Bolts i usually charge about $1 each. WIth an allen head shouldnt be a problem, its hex bolts etc that there would be a problem.

So if I sent you my passenger pegs and bolts you can coat the factory bolt heads and the powdercoat wont cause any problems with the allen wrench fitting into the bolt? Seems like it would fill in the space or chip off when you reinstall?

_____________________________

(in reply to TRGcoating)

Post #: 3

RE: bolts - 1/21/2008 8:11:42 AM

TRGcoating

Posts: 192
Joined: 11/9/2005
Status: offline

Should be fine, might need to force the allen key in a little. When i do bolts i go a little thinner. I have done a bunch for customers with no problems...only hex heads cause problems.

_____________________________

http://www.TRGcoating.com - High quality powder coating at the most affordable prices.

(in reply to CBR1000)

Post #: 4