CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

954 rim fix or buy new?

  Printable Version
CBR Forum >> Past CBR Models >> CBR 954RR >> 954 rim fix or buy new? Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
954 rim fix or buy new? - 1/29/2008 7:22:49 AM   
zoniebutt

 

Posts: 83
Joined: 1/29/2008
Status: offline
i just bought a 954 and and it has chrome rims... the problem is that the rear rim is bent but not too badly.. can chrome rims b fixed or should i just buy a new rim and get it chromed?
Post #: 1
RE: 954 rim fix or buy new? - 1/29/2008 1:37:56 PM   
pimpncbr954s


Posts: 606
Joined: 3/26/2007
Status: offline
pimpncbr954s's photo gallery
If its not that bad meaning pretty small (pictures would be very helpful) you can try a rubber mallet, only thing is if it puts enough stress on the dipped area it could crack....If your not concerned with the idea of the chrome cracking then do this as a temporary fix....ive seen single chrome rims on ebay alot so look there in the future.

(in reply to zoniebutt)
Post #: 2
RE: 954 rim fix or buy new? - 1/29/2008 3:33:26 PM   
bobjoezx


Posts: 2406
Joined: 9/27/2005
From: Wisconsin
Status: offline
bobjoezx's photo gallery
how does it ride... that's the main key


_____________________________


(in reply to pimpncbr954s)
Post #: 3
RE: 954 rim fix or buy new? - 1/29/2008 7:53:07 PM   
zoniebutt

 

Posts: 83
Joined: 1/29/2008
Status: offline
i got pix btu i dont know how to post dem

(in reply to bobjoezx)
Post #: 4
RE: 954 rim fix or buy new? - 1/29/2008 8:04:28 PM   
zoniebutt

 

Posts: 83
Joined: 1/29/2008
Status: offline

(in reply to zoniebutt)
Post #: 5
RE: 954 rim fix or buy new? - 1/30/2008 1:37:40 PM   
bobjoezx


Posts: 2406
Joined: 9/27/2005
From: Wisconsin
Status: offline
bobjoezx's photo gallery
and you didn't see that when you bought it!?

_____________________________


(in reply to zoniebutt)
Post #: 6
RE: 954 rim fix or buy new? - 1/30/2008 1:55:37 PM   
demonchild


Posts: 1494
Joined: 11/8/2006
From: Los Angeles, California
Status: offline
That dent is not that bad, although I wonder how it got on the rear rim. Pound it with something soft. If you get it close enough the balence should be okay.

_____________________________

-03 CBR 954RR
.Full Erion Ehaust
.K&N Filter
.-1/+2
.Barnett heavy duty clutch springs
.PCIII
-65 El Camino 14:1 CR 700 RWHP
-90 Toyota Pickup 4x4 SAS

(in reply to bobjoezx)
Post #: 7
RE: 954 rim fix or buy new? - 1/30/2008 5:29:35 PM   
pimpncbr954s


Posts: 606
Joined: 3/26/2007
Status: offline
pimpncbr954s's photo gallery
Thats not bad at all, take a rubber mallet to it! If possible take it to a rim shop and have them balance it after you straighten it as much as possible.

(in reply to demonchild)
Post #: 8
RE: 954 rim fix or buy new? - 1/30/2008 6:35:01 PM   
Icefox


Posts: 233
Joined: 2/7/2006
Status: offline
Icefox's photo gallery
Here is a picture of my wheel after I hit a pretty good sized rock that was in the middle of the road (for whatever reason), anyways the tire would not hold air and I thought that I was going to have to scrap the wheel. I looked into buying a used wheel from someone on eBay or someone that was parting out a bike on different forums but I was skeptical because I could not look at the wheel in person before I bought it. I heard of wheel repair shops and I found Wheel Works http://www.wheel-works.com , they are based out of California and get wheels shipped to them from customers all over the country for repairs. They charged me 160.00 to repair my wheel (re-bend and balance it both vertically and horizontally) so there is no wobble even at 150+ and you can barely see where the bend used to be. I'm sure they could re-bend a chromed wheel because they do Harley stuff too, but I'm sure you could just call and ask them about it. They told me they have never had a wheel that had been repaired ever come back from breaking, but I'm sure that any type of re-bending would weaken the metal a little bit. Just another option for you to consider that may cause less damage to the wheel than a rubber mallet or whatever you might try to use to pound out the bend!



_____________________________

2002 Honda CBR 954RR
-Clear Alternatives Integrated Rear Tail Light
-Two Brothers Carbon Fiber M2
-Vortex Frame Sliders
-Power Commander III USB
-Flush Mount Front Signals
-Vortex -1 Front Sprocket
-Scotts Steering Stabilizer

(in reply to zoniebutt)
Post #: 9
RE: 954 rim fix or buy new? - 1/31/2008 6:32:48 AM   
demonchild


Posts: 1494
Joined: 11/8/2006
From: Los Angeles, California
Status: offline
I like Icefoxes idea. I do not like using second hand parts. There is no telling what some idiot did with them.

_____________________________

-03 CBR 954RR
.Full Erion Ehaust
.K&N Filter
.-1/+2
.Barnett heavy duty clutch springs
.PCIII
-65 El Camino 14:1 CR 700 RWHP
-90 Toyota Pickup 4x4 SAS

(in reply to Icefox)
Post #: 10
RE: 954 rim fix or buy new? - 1/31/2008 8:39:49 AM   
zoniebutt

 

Posts: 83
Joined: 1/29/2008
Status: offline
alright.. im gonna hammer it as soon as i get my hands on a mallet lol.. but i think its leaking air... it noes not seem big enugh to leak air so this weekend i wana bring it out check where its leaking from any suggestions on how to check?

(in reply to demonchild)
Post #: 11
RE: 954 rim fix or buy new? - 1/31/2008 9:34:28 AM   
demonchild


Posts: 1494
Joined: 11/8/2006
From: Los Angeles, California
Status: offline
if it is a slow leak put the tire under water for awhile and see if air bubble congregate anywhere.

_____________________________

-03 CBR 954RR
.Full Erion Ehaust
.K&N Filter
.-1/+2
.Barnett heavy duty clutch springs
.PCIII
-65 El Camino 14:1 CR 700 RWHP
-90 Toyota Pickup 4x4 SAS

(in reply to zoniebutt)
Post #: 12
RE: 954 rim fix or buy new? - 1/31/2008 9:52:59 AM   
BikerBoy930


Posts: 77
Joined: 2/18/2007
From: Vegas Baby!!
Status: offline
Personally I would buy another wheel off of ebay.

(in reply to demonchild)
Post #: 13
RE: 954 rim fix or buy new? - 1/31/2008 12:38:10 PM   
zoniebutt

 

Posts: 83
Joined: 1/29/2008
Status: offline
yeah thats wat im gonna do this weekend lol o yeah and for ppl who got hids where u guys been puttin the brains? i dont got the innerfairings so i can just toss em in there...

(in reply to BikerBoy930)
Post #: 14
RE: 954 rim fix or buy new? - 2/5/2008 12:28:33 AM   
KidCr3nshaw



Posts: 3688
Joined: 10/5/2006
Status: offline
Hey man I've got a rim for you!

If I'm not mistaken, the 954 and 929 wheels swap straight over.  I have this thing and I only want $120+ shipping.  Let me know if you're interested.





_____________________________

1996 CBR 600F3
2002 CXR 400RR Supermoto wanna-be ;)

(in reply to zoniebutt)
Post #: 15
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2   next >   >>

 
CBR >> Past CBR Models >> CBR 954RR
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl7168
doncollins6257
tahoe sc5874
rrasco5615
pitsvtec5323
d2vw14_205095
tk954rr4900
vpsophmore4719
blue fox4575
chainstretch4558

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.