1100 into 900 frame

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

1100 into 900 frame

Printable Version

CBR >> Past CBR Models >> 900 & + Modifications >> 1100 into 900 frame

Page: [1]

Message

<< Older Topic Newer Topic >>

1100 into 900 frame - 3/11/2008 10:37:04 AM

Posts: 5
Joined: 3/11/2008
Status: offline

already asked this in 900 area before i realised this area was here. any one have any info on fittin a blackbird engine into a 900 frame?
cheers

Post #: 1

RE: 1100 into 900 frame - 3/13/2008 7:44:37 PM

petrorr

Posts: 200
Joined: 10/14/2007
Status: offline

Its been done before, or at least once that i know of....I hope youve prepped youself for the work involved...the blackbird motor is approximately 2 inches wider than the 900 so the guys who did it had to take the 900 frame and split it and weld in filler pieces to widen the frame...Ill find the article and post later

(in reply to De)

Post #: 2

RE: 1100 into 900 frame - 3/15/2008 11:17:27 PM

petrorr

Posts: 200
Joined: 10/14/2007
Status: offline

Cant find it , but it was in a past issue of superstreetbike

_____________________________

Long and low....thats how I roll

(in reply to petrorr)

Post #: 3