RE: Ugliest Bike Ever
Login  | |
|
RE: Ugliest Bike Ever - 3/13/2008 1:39:11 PM
|
|
|
dizzie56
I loves the fat chics
Posts: 1943
Joined: 5/27/2006
Status: offline
|
$400 is a fackin steal...you should be able to find a used tranny for pretty cheap. check out the r1 and yamaha forums for some part outs. you might just come away with the bike bein all fixed for even less than $2k if you do it right.
_____________________________
|
|
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 7:31:57 PM
|
|
|
HARDCORP 8654
Posts: 1121
Joined: 4/23/2007
Status: online
|
I'm not going to post over on the R1 forum. I had found a engine for the R1 at a local salvage yard. But the deal has kind of fell through at this point. Not because of either party's negligence. Just the motor they had turned out not to be running and let me know right away before I made the long drive.
Okay, I have located 04 motor this model IS fuel injected, but it's not coming with the injection setup the fuel injection setup would not fit in the frame. Anyway. It is SS built motor cranking out 170 hp FOR $ 1500. Here is the dyno sheet. Now, here is the question how many of you guys would go for this motor and how many of you would pull out the old motor and have the transmission rebuilt or rebuild it yourself
_____________________________
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 7:45:34 PM
|
|
|
SpiritRR
Posts: 1548
Joined: 8/3/2007
From: the Paddock
Status: online
|
So how would you get the FI setup in there then...
Personally, I think the extra HP doesn't show up until too high in the rev band to justify 15 large--unless you're building a track bike--in which case it's perfect. I'd wait to jump on a clean 98-02 stock motor, thereby saving three-quarters of a thousand dollars, and put it toward clean plastics. OEM FTW!
_____________________________
Original owner 1993CBR900RR
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 7:49:01 PM
|
|
|
PlayfulGod
Posts: 2552
Joined: 6/9/2007
From: Dalton, GA
Status: offline
|
great steal HC. Get with Jared (Thirdgen) and see it it can be fixed fairly easy.Since its stuck in gear I'm guessing sumtin is bent, but I'm not familiar with a bikes tranny.
_____________________________
For All your Hosting Needs, TechyGeek.com, ''''Get Your Geek On!''''
SBG
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 8:03:49 PM
|
|
|
TK954RR
Posts: 2438
Joined: 12/3/2006
From: Green Bay WI
Status: online
|
I would rebuild, but i really like to tinker.
_____________________________
 
Is this brutal enough for ya ! !
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 8:05:32 PM
|
|
|
HARDCORP 8654
Posts: 1121
Joined: 4/23/2007
Status: online
|
Well was thinking samething found a 2000 motor for $500 with 13,000 miles on it today. Was thinking maybe I would hang onto the original motor and find someone with a lot more knowledge than myself to rebuild the original motor for a spare or to sell out right
< Message edited by HARDCORP 8654 -- 4/26/2008 8:13:31 PM >
_____________________________
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 8:08:37 PM
|
|
|
TK954RR
Posts: 2438
Joined: 12/3/2006
From: Green Bay WI
Status: online
|
Thats a pretty solid deal, and just swapping should not be too much trouble for ya.
_____________________________
Is this brutal enough for ya ! !
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 8:12:06 PM
|
|
|
f3racer
Posts: 944
Joined: 6/27/2007
From: ft stewart ga, orlando fl
Status: offline
|
nice shit brother, good to see you in here
_____________________________
us army military police
sniper-"dont run, you'll only die tired"
www.myspace.com/2wheeledwndr
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 8:17:05 PM
|
|
|
HARDCORP 8654
Posts: 1121
Joined: 4/23/2007
Status: online
|
good to see you around to brother, what does the man who rides with team Hammer. Think of the little R1 project
_____________________________
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 9:08:09 PM
|
|
|
dwhite645
Posts: 1982
Joined: 1/21/2006
From: OldFatGuy's garage - stealing parts
Status: offline
|
FWIW if you buy a used motor elsewhere, there's no telling what may be wrong with that one. My advice is to buy a case splitter and find out what's wrong with the tranny. Could be as simple as a bent shift fork or drum. Maybe a tooth broke off a gear and is jammed on the shaft. You never know until you pull it apart.
Oh, I'm pretty sure that newer motor would not fit because of frame updates and all of that, so no loss there.
_____________________________
|
|
|
|
|
RE: Ugliest Bike Ever update - 4/26/2008 9:11:04 PM
|
|
|
rangerscott
Posts: 3074
Joined: 6/18/2007
From: Texas
Status: online
|
Dude. If you can dismantle all those guns you have, lube them, then reassemble them. You can rebuild an engine. 
I'm proving that with my vehicle engine and I only have 3 1/4 brain cells.
|
|
|
|
|
Printable Version
