RE: PARTING OUT - CBR F2
Login  | |
|
RE: PARTING OUT - CBR F2 - 3/19/2008 4:34:29 PM
|
|
|
texranger
Posts: 77
Joined: 12/25/2007
Status: offline
|
quote:
ORIGINAL: sweeper
Do u still have forks and triple trees both?? Speedo, front fender, front nose, front fairing stay?? IF so tell me me how much for all?? And front wheel with rotors and calipers
sweeper: Front Fender, Front nose and Front fairing stay, not available.
Still have the forks and triples trees (both)- $100 for all.
-Speedo, still have it, but the tach needle is broken and the cluster bezel has some damage. See pic below.
-Front Wheel, rotors and calipers, still have them. $ 100 for all, hardware included (spacers, axle, bolts, etc)
See pic below
Front Wheel, Calipers and Rotors
Let me know your zip code, and if you are interested, i'll find out about shipping cost (can get good rates with UPS).
Thanks,
Nick.
< Message edited by texranger -- 3/27/2008 11:29:56 AM >
|
|
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/19/2008 6:55:40 PM
|
|
|
sweeper
Posts: 6
Joined: 3/19/2008
Status: offline
|
Yes I want the forks and triple trees how much for the speedo? My Zipcode is 27513 and do u have paypal. I just got the rotors and calipers from someone else on the forum. How much for just the front wheel? Give me a call I have pm my #
< Message edited by sweeper -- 3/19/2008 7:56:05 PM >
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/19/2008 9:28:08 PM
|
|
|
paulooo
Posts: 34
Joined: 3/14/2008
Status: offline
|
how much for the rear rim... does the tire hav e tread left.... also the exaust and the chain guard.. let me know... if that guy doesnt take the front rim im interested too
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/21/2008 8:44:37 AM
|
|
|
oNi
Posts: 255
Joined: 6/22/2006
Status: offline
|
U have the tool kit for the bike?
_____________________________
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/22/2008 5:44:18 PM
|
|
|
nrecore0223
Posts: 37
Joined: 3/3/2008
Status: offline
|
how about the rear tire? What kind of tread is left? What size? All i need is the tire if you want keep the rim, rotors ect.. Or if you dont want to break it down how much for the whoe thing. Let me know asap.
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/22/2008 8:58:53 PM
|
|
|
Just4Fun
Posts: 7
Joined: 3/22/2008
Status: offline
|
Im new here and this is my first post. Im looking for that rear fender piece that mounts right on top of the swing arm and the mounting hardware
How much shipped to 97030
Thanks
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/24/2008 4:41:37 AM
|
|
|
thebaker
Posts: 5
Joined: 3/23/2008
Status: offline
|
Are the forks and triple tres still avail? If they are, let me know. $100 for all? Thanks!
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/24/2008 4:54:00 PM
|
|
|
texranger
Posts: 77
Joined: 12/25/2007
Status: offline
|
Sorry about the delay guys...
sweeper: $ 25 bucks for the speedo, it works good; the only problem is one mounting tab broken in half and the tach needle. Front wheel, $50 bucks. Front tire needs to be replaced. Shipping cost for the forks with triples, speedo and front wheel to 27513 is: $35.- (2 boxes)
paulooo: Rear Rim w/ tire : $80; rear rotor included. rear tire is a 180 and with less than 500 miles on it, pretty new. On the exhaust: i think it's not a F2/F3 system. it has separate clamps for each tube. will get a pic so you can see what i'm talking about. Chain guard: $30 whole thing with mounting hardware.
oNi: Sorry, no tool kit.
nrecore0223: I don't want to separate them. $80 bucks rim w/ tire. it's a 180. Lots of tread.
Just4Fun: Rear fender w/ monting hardware: $30.- Add $12 for shipping to 97030
thebaker: Forks and triple trees still available. $100 for all. Also, i just found in the garage a set of '94 forks, so there's 2 sets of forks available now.
Again, all prices do not include shipping (unless mentioned in reply) . If you are interested in something, just let me know your zip code and i'll find out shipping cost for you.
Thanks,
Nick.
|
|
|
|
|
RE: PARTING OUT - CBR F2 - 3/25/2008 4:15:19 PM
|
|
|
thebaker
Posts: 5
Joined: 3/23/2008
Status: offline
|
do you still have the speedo available? i don't need the forks, mine turned out to be fine. let me know how much shipping would be to zip 27592. thanks!
|
|
|
|
|
Printable Version
