RE: Lowering bikes

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

RE: Lowering bikes

Printable Version

CBR >> General >> Ladies Lounge >> RE: Lowering bikes

Page: << < prev 1 2 [3] 4 next > >>

Message

<< Older Topic Newer Topic >>

RE: Lowering bikes - 3/23/2006 4:52:35 PM

shraz

Posts: 684
Joined: 11/12/2005
From: CA
Status: offline

my F4i is 1 inch down
links at the back

just the ground clearance is affected
you have more confidence when you can flat foot both feet than not.

shh im not suppose to be posting in here

(in reply to pitsvtec)

Post #: 31

RE: Lowering bikes - 3/24/2006 10:18:53 AM

pitsvtec

Official CBRF Welcome Member
Posts: 5323
Joined: 7/28/2005
From: New Jersey
Status: offline

This helped me a great deal with how my bike handles and they also can adjust your spring so your not sitting higher in the back if you don't have the weight down, but you would need to find a place near you that does it.

http://www.cbrforum.com/m_71596/tm.htm

_____________________________

Ride for the love of it, not for the attention from it. See you riding!

(in reply to shraz)

Post #: 32

RE: Lowering bikes - 3/24/2006 12:12:26 PM

neebelung

Posts: 605
Joined: 12/6/2004
From: Jacksonville, Florida
Status: offline

quote:

ORIGINAL: shraz
just the ground clearance is affected

Sooooo untrue. HANDLING is affected greatly, which in turn affects safety.

'nuff said.

_____________________________

(in reply to shraz)

Post #: 33

RE: Lowering bikes - 3/28/2006 9:51:04 PM

ladybug600

Posts: 49
Joined: 3/23/2006
Status: offline

I'm 5'4 and can touch fine on my 600 but my old 1990 ex500 was so top heavy i found that in order to get better traction and touch i got the corbin seat and that alone dropped me 2 inches inthe seat! whatever your comfortable with is fine and if your unsure then looking at the seat to shave or picking up a lower one is probably your best bet. because dropping yourself in the seat more is always a good thing wether your pulling it up or just relaxing......

(in reply to neebelung)

Post #: 34

RE: Lowering bikes - 3/29/2006 8:19:17 PM

aimstar

Posts: 11
Joined: 3/27/2006
Status: offline

I'm 5'6". I am "almost" flat footed, but not quite, so I tend to slightly lean and put my left foot down when i stop. I am lucky to be long legged/shorter torso. I have a friend that put the dog bone on her 05' CBR600 and hasn't had any trouble at all.

< Message edited by aimstar -- 3/29/2006 8:20:55 PM >

_____________________________

05' CBR600RR Tribal

Micron Dual Exhaust
Intergrated Tail Lights
Sportech Smoked Chrome Windshield
Custom Tribal Heel Guards
Custom Made Swing Arm Spools
Flushmounts-coming soon

My other baby!
06' Cobalt SS Supercharged

(in reply to Red Hooter)

Post #: 35

RE: Lowering bikes - 4/27/2006 12:01:28 PM

slvr600RR

Posts: 26
Joined: 4/25/2006
Status: offline

I am 5ft. 3# and have to have a lowering kit put on it.

_____________________________

DRIVE IT LIKE YOU STOLE IT!!!!!!!!!!!!!!!!!

(in reply to Red Hooter)

Post #: 36

RE: Lowering bikes - 5/9/2006 6:05:22 PM

Miss Kitty

Posts: 8
Joined: 5/7/2006
Status: offline

I'm just 5' maybe..... and just upgraded from a cruiser from which I could definately touch, to a 02' CBR F4i at which I couldn't touch until I had it lowered. Unfortunely it could only go down 1 or 3 inchs. 3 inchs is way to much, because then your risking damage to your bike when you go over any bumps,dips in the road and even going around turns. So now it's only lowered 1 inch and I can barely touch but can manage. Lowering your bike is not good, but when you're vertically challenged like myself, theres really no way around it. I even tried some of my high heel boots and that didn't work. Bottom line is, you really got to go with what feels comfortable to you.

(in reply to slvr600RR)

Post #: 37

RE: Lowering bikes - 5/25/2006 4:44:11 PM

stacy_F3

Posts: 2
Joined: 5/11/2006
Status: offline

Slamming your bike won't affect handling unless you only drop the ass end. When you only drop the ass end it extends the rake of the forks making it more chopper-like. Just make sure that when you drop it you drop the front end as well and have the front slightly lower than the back for improved handling. If you're carving corners and dragging your exhaust/rear sets, chances are that you're not even on the bike anymore. If you're ballsy or ovary enough to get it that low in a corner you need to start charging admission for people to watch you ride. As for clearance issues with the belly, just take it easy on speed-bumps and driveways and for god sakes don't hit any animals in the road. The answer is yes ladies, drop your bike so you feel comfortable on it otherwise you'll hate stop lights....

(in reply to Miss Kitty)

Post #: 38

RE: Lowering bikes - 5/26/2006 12:14:04 AM

pitsvtec

Official CBRF Welcome Member
Posts: 5323
Joined: 7/28/2005
From: New Jersey
Status: offline

I rode an F4i that was dropped 3 inches....handling SUCKED! Overall performance....BAD! But that was just my intake...

_____________________________

Ride for the love of it, not for the attention from it. See you riding!

(in reply to stacy_F3)

Post #: 39

RE: Lowering bikes - 5/26/2006 4:20:57 PM

The Ant

Posts: 72
Joined: 3/3/2006
Status: offline

If you're ever over here in Oregon - you can ride mine, handles like a dream.

There's so much that can affect the ride - perhaps the one you rode wasn't lowered properly, or even the compression/rebound settings weren't adjusted right. Wheels, tires, steering head bearings could be loose or too tight, sag could be way off.

I've had my dirt bike professionally lowered as well, believe me, life on a motorcycle is waaaay easier if you can touch the ground solidly. I know some gals manage, slide practically off when they come to a stop, all that, but why make things more difficult.

Spend some time, energy, $$ to getting your bike set up properly for your height and weight - effort well spent.

-Susan
'04CBR600F4i - lowered and I love it!

(in reply to pitsvtec)

Post #: 40

RE: Lowering bikes - 5/28/2006 10:32:27 AM

milko

Posts: 105
Joined: 3/6/2006
Status: offline

quote:

ORIGINAL: ladybug600

I'm 5'4 and can touch fine on my 600 but my old 1990 ex500 was so top heavy i found that in order to get better traction and touch i got the corbin seat and that alone dropped me 2 inches inthe seat! whatever your comfortable with is fine and if your unsure then looking at the seat to shave or picking up a lower one is probably your best bet. because dropping yourself in the seat more is always a good thing wether your pulling it up or just relaxing......

What year/make 600 can you flat foot? I'm 5'4 also and would like to touch the ground with both feet. Can you post a picture with you on your bike with feet touching the ground. Thanks a million..Got it suxs to be short on a street bike

< Message edited by milko -- 5/28/2006 10:34:12 AM >

(in reply to ladybug600)

Post #: 41

RE: Lowering bikes - 5/28/2006 10:15:44 PM

The Ant

Posts: 72
Joined: 3/3/2006
Status: offline

I'm 5'3", posted this picture on an older post. Sorry I don't have a new one yet!

-Susan
'04CBR600F4i

Thumbnail Image

Attachment (1)

(in reply to milko)

Post #: 42

RE: Lowering bikes - 5/28/2006 10:19:04 PM

The Ant

Posts: 72
Joined: 3/3/2006
Status: offline

If you click on the attachment doohicky at the bottom (on my previous post), the photo will get bigger. You can just make out my right foot on the other side of the bike, heels don't quite touch, but good solid balls of my feet. Both feet touch the same.
-Susan
600F4i

(in reply to The Ant)

Post #: 43

RE: Lowering bikes - 5/30/2006 12:23:52 PM

MyRulz

Posts: 45
Joined: 9/13/2005
From: Leander, Tx by way of Dallas!
Status: offline

I am 5'3" and ride with River Road Field boots ( http://www.motorcycle-superstore.com/item.aspx?style=10129&department=125&Division=1 ) that give me about 2" more. My F4i has been lowered (both front and back) using the 1" dog bones. It is very stable and handles well, however I do have to use caution and go slowly over street humps, RR xings, large dips, etc. IMO giving up a little clearance is well worth the stability I get in retrun by being able to touch the ground firmly with both feet. Touching at a stoplight with the toes is ok, but you have no leverage to push the bike back up if it tilts a little too much in a slow speed turn-around or such. Backing up (especially if there is ANY type of incline) is impossible for me without being able to plant both feet firmly on the ground. I know my views do not go along with most I have read here, but it works great for me.

_____________________________

~ Lisa

“If you pick up a starving dog and make him prosperous, he will not bite you. This is the principal difference between a dog and man.”

~ 2005 Silver & Black CBR 600rr

(in reply to The Ant)

Post #: 44

RE: Lowering bikes - 5/30/2006 1:35:06 PM

The Ant

Posts: 72
Joined: 3/3/2006
Status: offline

Yep, I agree! Being able to touch firmly means you don't have to ask strangers for help if you get in a spot you'd otherwise not be able to turn around, gravel parking lots are no big deal, putting your toe down on a little rock or leaf or anything slippery doesn't mean you're headed for the ground.

The gain in confidence is priceless.

-Susan
'04F4i

(in reply to MyRulz)

Post #: 45