left crank case cover question

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

left crank case cover question

Printable Version

CBR >> Past CBR Models >> CBR 1000F "Hurricane" >> left crank case cover question

Page: [1]

Message

<< Older Topic Newer Topic >>

left crank case cover question - 3/15/2008 1:51:06 PM

XXCBRChrisXX

Posts: 148
Joined: 2/20/2007
Status: offline

hey i do dirt or anyone got a leaky side cover on left side of engine. took off plastic cover and the bottom bolt that holds the brass triangle part on. its leakin from there. but i dont see any hole. and the bolt is still tight. so thought i would ask the wise forum.

thanks

_____________________________

one person and a hammer is good but its amazeing what two people with a hammer can do

Post #: 1

RE: left crank case cover question - 3/15/2008 4:39:19 PM

Spawny

Posts: 17
Joined: 12/22/2007
From: Bend, Oregon
Status: offline

When I bought my '96 I had the same problem. I've also seen numerous posts in here bout the same thing. My bike had been dropped and it forced the bolt you mention into the cover. Not enough to notice, but just enough to put a hairline crack in it. I did exactly what everyone in this forum said..... pull the cover off, JB weld the inside where the crack is, and then I made a gasket out of a manilla folder and ball peen hammer, used some gasket sealant and....Voila!! a fix that only costed about 10 bucks!!