rs-5 question
Login  | |
|
rs-5 question - 1/19/2006 11:37:22 PM
|
|
|
feedingfrenzy
Posts: 170
Joined: 1/10/2006
Status: offline
|
hey i have a 04 600rr and i just got my yosh rs-5 installed today. its a slip on and it sounds great. the only thing that bothers me is that it sits crooked under the tail. nothing looks bent and everything is in the right place it just seems the clamp isnt holding it right i have no idea. any one else have this problem or any suggestions thanks
|
|
|
|
|
|
|
RE: rs-5 question - 1/20/2006 1:39:13 PM
|
|
|
Anubis
Posts: 2159
Joined: 6/27/2005
Status: offline
|
First check the clamp, if its only slighty off then grab hold of it with 2 hands and turn the can. Mine goes off centre the odd occasion because the springs holding it to the link pipe are crap. The above method works for me. Check the clamp right first though.
_____________________________
Liverpool-UK
Bla Bla Bla - Just Ride It !!
|
|
|
|
|
RE: rs-5 question - 1/20/2006 4:25:35 PM
|
|
|
L8X
Posts: 1909
Joined: 12/19/2004
Status: offline
|
yah they usually are on most exhausts. closest to stock ive seen is devil. 
_____________________________
www.LexRacing.com
|
|
|
|
|
|
|
RE: rs-5 question - 1/20/2006 11:25:52 PM
|
|
|
doncollins
Posts: 6255
Joined: 7/21/2005
From: OH, KY & WV
Status: offline
|
Can one of you guys do me a favor... measure the band that holds the RS5 on. I'm finishing a license plate bracket and I need to know how wide (front to back) it is.
|
|
|
|
|
RE: rs-5 question - 1/21/2006 5:39:33 AM
|
|
|
Anubis
Posts: 2159
Joined: 6/27/2005
Status: offline
|
feedingfrenzy show me a pic so i can tell what you mean? ?
Yours anything like this? >>>>>>>>>>>
Don, My bikes right here with me in work I don`t have a tape to measure the band though, you want width and length? Cos length might be a problem with it fitted.
_____________________________
Liverpool-UK
Bla Bla Bla - Just Ride It !!
|
|
|
|
|
RE: rs-5 question - 1/21/2006 10:04:13 AM
|
|
|
doncollins
Posts: 6255
Joined: 7/21/2005
From: OH, KY & WV
Status: offline
|
quote:
ORIGINAL: Anubis
Don, My bikes right here with me in work I don`t have a tape to measure the band though, you want width and length? Cos length might be a problem with it fitted.
No... well, I need the width (from the front of the bike toward the back. so I know how long of a tab I can make. The length (side to side on the bike)... if you can, I'd like to know how wide of an area there is flat on the bottom of the RS5. I don't need the entire circumference of the band, just the bottom area where it's flat. Do you see where I'm going with this? I have, hopefully, a connection with a burn table. I'm going to make a to scale template on kraft paper with measurements and see if I can't have a few of stainless steel brackets cut out for me. This will produce a nice clean cut product and once the drawing is in the machine... the brackets can be made in minutes. If I make them by hand, I'll have to use aluminum.
|
|
|
|
|
Printable Version
