Wires gone haywire!

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Wires gone haywire!

Printable Version

CBR Forums >> Past CBR Models >> CBR 929RR >> Wires gone haywire!

Page: [1]

Message

<< Older Topic Newer Topic >>

Wires gone haywire! - 4/2/2008 3:26:41 AM

HungusMaximist

Posts: 11
Joined: 12/24/2007
Status: offline

I found out that my right hand controller unit has got an issue so I opened it up.

I found one of the two wires that connects to the kills-switch has moved off/separated off, what I believe is the solder. So the result is, the kill switch is always in the off position.

Is it as easy as me re-soldering it on?

Since I've never soldered anything so delicate, I just wanted some advice.

I've included two photos for your convenience.

Attachment (1)

< Message edited by HungusMaximist -- 4/2/2008 3:46:47 AM >

Post #: 1

RE: Wires gone haywire! - 4/2/2008 3:45:05 AM

HungusMaximist

Posts: 11
Joined: 12/24/2007
Status: offline

Pic 2

Attachment (1)

(in reply to HungusMaximist)

Post #: 2

RE: Wires gone haywire! - 4/2/2008 4:10:13 AM

fuze

Posts: 1420
Joined: 4/29/2007
Status: online

Absolutely. Just re-solder that wire and it's golden, that is actualy a fairly common problem. Be careful with the throttle sleeve when reattaching the cables its semi-fragile.

(in reply to HungusMaximist)

Post #: 3