Fuel injection 34 code (Full Version)

CBR Forum >> Current Honda CBR Models >> 1000 Modifications

Fuel injection 34 code

  

Red_Rocket -> Fuel injection 34 code (4/29/2008 10:33:57 AM)

Hey all. New to the forum. I have an '06 1000 RR and I just did some mods. The first mod was installing 2 BMC race air filters. I had no issues after the install. It ran fine with no error codes. I then installed a Yoshimura RS-5 exhaust. It's just the midpipe and silencer. After the install I started the bike and started getting codes for fuel injection. 3 longs and 4 shorts. I believe it's 34. I assume that I need a power commander (which is coming in two days), but I don't want to keep throwing parts at a perfectly good bike. Any ideas??? My hope is that the power commander will take care of the fuel injection issue.

  
MgA_ODEN -> RE: Fuel injection 34 code (4/30/2008 5:23:10 AM)

http://www.cbrforum.com/m_530016/tm.htm

Red_Rocket -> RE: Fuel injection 34 code (4/30/2008 11:01:40 AM)

I never unplugged the servo. I just tucked the cables away.

MgA_ODEN -> RE: Fuel injection 34 code (5/1/2008 9:29:22 AM)


Loose the cables.


[image]http://img237.imageshack.us/img237/1096/milcodezt2.jpg[/image]

MgA_ODEN -> RE: Fuel injection 34 code (5/1/2008 9:38:48 AM)

[image]http://img356.imageshack.us/img356/921/87372909ur7.jpg[/image]

[image]http://img379.imageshack.us/img379/4315/57689150ap7.jpg[/image]

Red_Rocket -> RE: Fuel injection 34 code (5/2/2008 9:08:24 AM)

Well I took the tail apart today seeing how to lose the cables. Thanx for the help. It's much appreciated. I cannot figure out how the box comes apart to get at those cables. All of the connections seem tight for the wiring. I should be getting the power commander today and hopefully that will solve the problem. If not, I am stuck with this stupid light.

MgA_ODEN -> RE: Fuel injection 34 code (5/2/2008 9:24:18 AM)

A power commander is not going to fix the light , see if this link helps.

http://www.hardracing.com/CBR1000Exhaust.htm

Red_Rocket -> RE: Fuel injection 34 code (5/2/2008 10:48:57 AM)

Figured it out. What a pain. I thought I had to remove to screw on top of the servo. Turns out the plastic piece just snaps into place. Now I got an extra nut. First casualty I guess. Thanks for the help guys...

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.