|
outontherip -> fender eliminator (5/1/2008 9:21:16 PM)
|
this kit from two brothers works really well but you have to be innovative the wires r not long enough and the wiring diagram that comes with it is not very clear so go to the net and pull up the diagram for two bros site. i bought the carbon fiber pipe and comes with 2 clamps the kit calls for only using one side of the clamp combined w/ the bracket that holds your plate and turn signals to secure the pipe. this was very sloppy its tricky but if u use both side of the oval clamp the pipe is tight takes time and a little knuckle skinning sh*t but much mo better. i think it came out nice tell me what u think
[image]local://upfiles/21089/6C3FF2E81C74414AABCF89655311E6B0.jpg[/image]
[image]local://upfiles/21089/04B52C0AF9D84BC09E28C0698781BA5D.jpg[/image]
[image]local://upfiles/21089/41DBCBFEBAA742D982AB6F8D23BCEF91.jpg[/image]
|
|
|
|
