intergrated turn signal/brake light question

Printable Version

CBR Forums >> Current Honda CBR Models >> 600 Modifications >> intergrated turn signal/brake light question

Page: [1]

Login Message << Older Topic   Newer Topic >>

intergrated turn signal/brake light question - 5/4/2008 9:00:00 AM    Gip714 Posts: 72 Joined: 3/7/2007 From: Bradenton, FL Status: offline ok so i have my tail section off and i know where to plug in my brake light but for the turn signals, i have no clue.  the directions that came with them suck ass and dont tell me shit and im not that great with this kinda stuff anyways, so i need help.  there are 3 plugs plus the actual brake plug, white, blue, and another color i cant remember.  are those my turn signal wires?  and if so, does anyone know which is which? _____________________________ 2005 600RR pretty much stock for now Post #: 1

RE: intergrated turn signal/brake light question - 5/4/2008 7:15:54 PM    odysseyzray   Posts: 49 Joined: 3/25/2008 Status: offline Black or black with white stripe, some older CBR has it on brown should be for the tail light. Left turn should be orange. Right turn should be blue. Blacks or greens, is ground. Good luck ... hope this helps (in reply to Gip714) Post #: 2

RE: intergrated turn signal/brake light question - 5/4/2008 9:13:33 PM    gotobatter   Posts: 166 Joined: 4/11/2008 Status: offline +1 odyssey _____________________________ Honda''s cost more money, but there is a reason for that! (in reply to odysseyzray) Post #: 3

RE: intergrated turn signal/brake light question - 5/4/2008 11:04:18 PM    Gip714 Posts: 72 Joined: 3/7/2007 From: Bradenton, FL Status: offline thanks man, after i posted this, i just went down and started testing things out.  i figured out which is which, i just took the wire and stuck it in the plug hole and they started blinking.  now to cut the plugs off and see which wire i use is the only question now.  bc i believe once i cut the plug off there will be 3 wires not just one, i could be wrong tho, i couldnt tell bc the rubber harness was in the way. _____________________________ 2005 600RR pretty much stock for now (in reply to gotobatter) Post #: 4

RE: intergrated turn signal/brake light question - 5/6/2008 1:28:32 AM    Nimbus87 Posts: 38 Joined: 4/11/2008 Status: offline Its a pain if you are going to use the resistors (you have to cut into the wire harness). What you want to do is cut the ends off of your stock blinkers, wire them up to your intergrated one, then you just connect the colors together and wala. Test them before putting your tail back on (so when you hit left it blinks left). (in reply to Gip714) Post #: 5

RE: intergrated turn signal/brake light question - 5/6/2008 9:40:04 AM    Gip714 Posts: 72 Joined: 3/7/2007 From: Bradenton, FL Status: offline thats the thing, the guy that owned it before me took the factory blinkers off and when he took the tail section off he just disconnected them at the plugs. So instead of being able to do that I have to cut off the other plug then connect the blinker wire, but that'll leave 2 exposed wires. _____________________________ 2005 600RR pretty much stock for now (in reply to Nimbus87) Post #: 6

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Top 10 Posters
voodoochyl 6234 doncollins 6227 tahoe sc 5797 pitsvtec 5316 rrasco 4875 d2dgraphix_6 4673 blue fox 4273 vpsophmore 4181 havoc 4009 chainstretch 3944

New Vendors
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.