Gas tank rubbers? (Full Version)

CBR >> Past CBR Models >> CBR 600F2

Gas tank rubbers?

  

SpecR -> Gas tank rubbers? (5/8/2008 7:35:37 PM)

Can someone tell me what rubber parts I need to put under the sides of the gas tank to make it stay put?  I have some rubber gloves rolled up and stuck in there, but that's a little too ghetto.

Is it Part 20, 29, 21, etc?  And how many of each?

  
bindelsf2 -> RE: Gas tank rubbers? (5/8/2008 8:14:23 PM)

trojan's


i just cut a slit in a piece of fuel line  then put the lip of the tank in the slit so that the rounded part is on the frame and put one on each side of the tank in between the frame and it works great plus its under the fairings so you cant see it.

FNQuickF2 -> RE: Gas tank rubbers? (5/8/2008 8:19:43 PM)

I know there's the bigger rubber bumper(#20) on the left side of the tank...I'm not positive about the right side. I haven't noticed it on mine. That's about all I can give 'ya.
RB

radtechrider -> RE: Gas tank rubbers? (5/8/2008 8:23:29 PM)

look at the micro-fich here http://fiche.ronayers.com .  I just put mine on.  Less than $5.00

airick -> RE: Gas tank rubbers? (5/8/2008 8:52:06 PM)

+1 to bindelsf2's split fuel lines

MikeInCtown -> RE: Gas tank rubbers? (5/9/2008 7:36:58 AM)

Damn, i'm going to have to look at mine. When I pulled the tank last year I only had the rubber parts at each mounting bolt. When I bolted it back on it rocked slightly from side to side, but doesn't move or vibrate at all with the fairings on and me on the bike. (and fuel inside)

jahnaboi -> RE: Gas tank rubbers? (5/9/2008 8:41:55 AM)

Which number is it? number 21, 20, or 29?

SpecR -> RE: Gas tank rubbers? (5/9/2008 9:39:59 AM)

That's what I wanted to know, the microfiche is really vague.

I can't beleive I didn't think to use fuel hose...  if you're going to ghetto rig it, always think of the BEST way to ghetto rig it.

bindelsf2 -> RE: Gas tank rubbers? (5/9/2008 2:34:16 PM)

quote:

ORIGINAL: SpecR

That's what I wanted to know, the microfiche is really vague.

I can't beleive I didn't think to use fuel hose...  if you're going to ghetto rig it, always think of the BEST way to ghetto rig it.



yep its cheap (probably have 4" laying around), no ship time and works like a charm! if you want to get real fancy like i did use clear..[8|]

radtechrider -> RE: Gas tank rubbers? (5/9/2008 10:44:16 PM)

20 is the rubber that goes on the side of the tank at the frame.  Here is another link with a microfich that may hve better description http://www.cheapcycleparts.com/pages/parts/viewbybrand/7/Honda.aspx?gclid=CK2lxbvos5ECFQHgPAodoUksdQ

black_98civic -> RE: Gas tank rubbers? (5/10/2008 1:20:18 PM)

when i took my bike apart this winter i noticed mine were worn in half and i had some grey foam double sided stickie tape that was the same thickness and width and cut it to length and just used that. worked perfect the foam matched the color of the frame and the other stickie side that faces up still has the stuff you have to peel off to make it stick left on it so it only sticks to the frame

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.