Gas tank rubbers?

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Gas tank rubbers?

Printable Version

CBR Forum >> Past CBR Models >> CBR 600F2 >> Gas tank rubbers?

Page: [1]

Message

<< Older Topic Newer Topic >>

Gas tank rubbers? - 5/8/2008 7:35:37 PM

SpecR

Posts: 301
Joined: 10/19/2007
Status: offline

Can someone tell me what rubber parts I need to put under the sides of the gas tank to make it stay put? I have some rubber gloves rolled up and stuck in there, but that's a little too ghetto.

Is it Part 20, 29, 21, etc? And how many of each?

< Message edited by SpecR -- 5/8/2008 7:43:10 PM >

Post #: 1

RE: Gas tank rubbers? - 5/8/2008 8:14:23 PM

bindelsf2

Posts: 1327
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

trojan's

i just cut a slit in a piece of fuel line then put the lip of the tank in the slit so that the rounded part is on the frame and put one on each side of the tank in between the frame and it works great plus its under the fairings so you cant see it.

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

(in reply to SpecR)

Post #: 2

RE: Gas tank rubbers? - 5/8/2008 8:19:43 PM

FNQuickF2

Posts: 754
Joined: 4/30/2007
From: Tacoma,WA staring at my wifes cans^
Status: offline

I know there's the bigger rubber bumper(#20) on the left side of the tank...I'm not positive about the right side. I haven't noticed it on mine. That's about all I can give 'ya.
RB

_____________________________

Lowered '92 F2 ...The the cleanest F2 you'll ever see! Feb.2008 ROTM Winner.

(in reply to SpecR)

Post #: 3

RE: Gas tank rubbers? - 5/8/2008 8:23:29 PM

radtechrider

Posts: 87
Joined: 1/2/2008
Status: offline

look at the micro-fich here http://fiche.ronayers.com . I just put mine on. Less than $5.00

(in reply to FNQuickF2)

Post #: 4

RE: Gas tank rubbers? - 5/8/2008 8:52:06 PM

airick

Posts: 65
Joined: 9/12/2006
Status: offline

+1 to bindelsf2's split fuel lines

_____________________________

1993 CBR600 F2
-Vance & Hines Pipe
-K&N Air Filter
-Dunlop D208 tires
-Frame sliders
-Blue metal flake/carbon fiber grafix
-Carbon fiber front fender
-Fender eliminator kit

(in reply to radtechrider)

Post #: 5

RE: Gas tank rubbers? - 5/9/2008 7:36:58 AM

MikeInCtown

Posts: 989
Joined: 6/6/2007
Status: offline

Damn, i'm going to have to look at mine. When I pulled the tank last year I only had the rubber parts at each mounting bolt. When I bolted it back on it rocked slightly from side to side, but doesn't move or vibrate at all with the fairings on and me on the bike. (and fuel inside)

(in reply to airick)

Post #: 6

RE: Gas tank rubbers? - 5/9/2008 8:41:55 AM

jahnaboi

Posts: 361
Joined: 8/29/2007
Status: offline

Which number is it? number 21, 20, or 29?

(in reply to MikeInCtown)

Post #: 7

RE: Gas tank rubbers? - 5/9/2008 9:39:59 AM

SpecR

Posts: 301
Joined: 10/19/2007
Status: offline

That's what I wanted to know, the microfiche is really vague.

I can't beleive I didn't think to use fuel hose... if you're going to ghetto rig it, always think of the BEST way to ghetto rig it.

(in reply to jahnaboi)

Post #: 8

RE: Gas tank rubbers? - 5/9/2008 2:34:16 PM

bindelsf2

Posts: 1327
Joined: 5/7/2006
From: YES THAT IS A 900 ENGINE IN A F2 ON SPRAY
Status: offline

quote:

ORIGINAL: SpecR

That's what I wanted to know, the microfiche is really vague.

I can't beleive I didn't think to use fuel hose... if you're going to ghetto rig it, always think of the BEST way to ghetto rig it.

yep its cheap (probably have 4" laying around), no ship time and works like a charm! if you want to get real fancy like i did use clear..

_____________________________

nitrous is like a slut, you wanna hit it but are scared of the consequences!

honda CBR 600F2/900RR
-93 900RR ENGINE (893cc)
10" stretch
-NOS
-D&D race series exhaust
-Stage 7 jet kit and single filters
-98 F3 tail
-pingel rear strut

(in reply to SpecR)

Post #: 9

RE: Gas tank rubbers? - 5/9/2008 10:44:16 PM

radtechrider

Posts: 87
Joined: 1/2/2008
Status: offline

20 is the rubber that goes on the side of the tank at the frame. Here is another link with a microfich that may hve better description http://www.cheapcycleparts.com/pages/parts/viewbybrand/7/Honda.aspx?gclid=CK2lxbvos5ECFQHgPAodoUksdQ

(in reply to bindelsf2)

Post #: 10

RE: Gas tank rubbers? - 5/10/2008 1:20:18 PM

black_98civic

Posts: 138
Joined: 9/6/2007
Status: offline

when i took my bike apart this winter i noticed mine were worn in half and i had some grey foam double sided stickie tape that was the same thickness and width and cut it to length and just used that. worked perfect the foam matched the color of the frame and the other stickie side that faces up still has the stuff you have to peel off to make it stick left on it so it only sticks to the frame

_____________________________