How to fit F3 swingarm to an F1? (Full Version)

CBR >> Past CBR Models >> CBR 600F

How to fit F3 swingarm to an F1?

  

polarpanther -> How to fit F3 swingarm to an F1? (5/10/2008 5:52:33 AM)

Hey guys, my 1st post on this exellent forum :)

I have an old CBR 600 F1 1990 that needs a major overhal. Since I am going to spend alot of time and some money on the bike, I consider doing som major upgrades on it.

First off, will the F3 swingarm fit the F1 frame? I also want to change the forks and front brakes to an F3. Is this possible without any massive chanhes to the frame?

Any help will be appreciated. I also need some help finding these parts (rims included).

  
michigan_313 -> RE: How to fit F3 swingarm to an F1? (5/10/2008 5:22:42 PM)

well, the following should answer most of your questions and get you started.

http://www.cbrforum.com/m_550081/tm.htm

http://www.cbrforum.com/m_520514/tm.htm

http://www.cbrforum.com/m_512974/tm.htm

http://www.cbrforum.com/m_213131/tm.htm

http://www.cbrforum.com/m_466033/tm.htm

http://www.cbrforum.com/m_457284/tm.htm

http://www.cbrextreme.com/forum/index.php?topic=4223.0

http://www.cbrextreme.com/forum/index.php?topic=2150.0

out of everything you would need for the front suspension, the rim will be the hardest item to find if not the most expensive.

polarpanther -> RE: How to fit F3 swingarm to an F1? (5/11/2008 4:37:29 AM)

Thanks a lot Sir! :)

Edit:

I have looked through the links now, and have to say the front-end swap you did was awesome. Really nice work! Thanx again for helping me.

  

Page: [1]

Return to CBR Forum home page or view the Full Version of this page.