CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

Carb rebuild, where to get?

  Printable Version
CBR Forums >> Past CBR Models >> CBR 600F2 >> Carb rebuild, where to get? Page: [1]
Login
Message << Older Topic   Newer Topic >>
Carb rebuild, where to get? - 5/16/2008 5:02:53 PM   
RaiLS

 

Posts: 6
Joined: 3/2/2008
Status: offline
I need to know where to get a rebuild kit for my 91 F2. I'm told the carbs need to be redone cause the damn thing dies on the freeway. Been getting progressivley worse and now doesn't like to idle. Crack the throttle and it dies. I'm looking around online and I'm having a hard time. This bike is my only transportation at the time and I need to get this thing running. Any help is greatly appriciated.
Post #: 1
RE: Carb rebuild, where to get? - 5/21/2008 6:56:31 PM   
twissta


Posts: 34
Joined: 4/20/2007
Status: offline
Here is the site that I had to buy individual parts for my carb rebuild ca get somewhat $$$ but it must be done. As we post I am waiting on my parts right now. Once you get the carbs of it is pretty easy and self ex[planitory. I would also prepare to sink the carbs again after doing so.......

(in reply to RaiLS)
Post #: 2
RE: Carb rebuild, where to get? - 5/21/2008 6:57:40 PM   
twissta


Posts: 34
Joined: 4/20/2007
Status: offline
http://www.hidyhondapowersports.com/fiche_select.asp

Forgot to paste it try them prices fluctuate but so far they were the cheapest

(in reply to twissta)
Post #: 3
RE: Carb rebuild, where to get? - 5/22/2008 4:36:51 AM   
woo545


Posts: 1338
Joined: 6/3/2007
Status: offline
What exactly do you mean by rebuild?

Order the gaskets and then pull the carbs and clean them out. Make sure ALL jets are clear. Make sure the bowls look fine and the floats move freely and aren't damaged.  Then reinstall, sync them then fine tune the idle screws as per the service manual.


_____________________________


The sharpest bulb in the box being the broken one, of course.


(in reply to twissta)
Post #: 4
RE: Carb rebuild, where to get? - 5/22/2008 6:15:30 AM   
redzintimidator


Posts: 1289
Joined: 8/6/2007
From: Greene, NY
Status: offline
redzintimidator's photo gallery
Look in the how-to section for a how to rebuild your carbs. Do what the first post tells you, then on the bottom of the first page, i made a post about how to clean the jets. The jets are the most important part so dont skimp there. You sohuldnt have to buy anything except a $4 can of carb cleaner

_____________________________


OKIEZAC - CBRforum buddy

(in reply to woo545)
Post #: 5
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
CBR >> Past CBR Models >> CBR 600F2
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
doncollins6207
voodoochyl5847
tahoe sc5781
pitsvtec5304
rrasco4703
d2dgraphix_64673
blue fox4080
vpsophmore3950
havoc3889
kidcr3nshaw3683

New Vendors
SuperBikeStore.net
Sport Bike GPS
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.