95 motor on a 93 chassi

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

95 motor on a 93 chassi

Printable Version

CBR Forum >> Past CBR Models >> CBR 600F2 >> 95 motor on a 93 chassi

Page: [1]

Message

<< Older Topic Newer Topic >>

95 motor on a 93 chassi - 5/29/2008 12:43:43 PM

horsboel

Posts: 2
Joined: 5/29/2008
Status: offline

Does anyone know if a 1995 cbr 600 motor fits a 1993 chassi with out any problems.
I don´t want to do alot of rewiring and all kinds of problems. If it doesn´t fit, with out
problems I´m not going to do it.

Post #: 1

RE: 95 motor on a 93 chassi - 6/3/2008 5:19:12 AM

kjohnson

Posts: 536
Joined: 7/31/2007
Status: offline

Yes,it will bolt in with no problems whatsoever.

Yes,you can run it on your F2 harness and CDI.

Yes,it is the way to go.The F3 motor is that much of an improvement over the F2.No,it's not gonna give you R1 power,but it will shift easier/smoother and the synchro ratios are closer together.You'll dig it

.

_____________________________

Street:F2-Fox Twin Clicker,Thermosman Forks,G'ridge lines,NGK Iridiums,Two Bros pipe,F3 rear wheel,Bridgestone 002 pro
Race:F2/3-EBC rotor kit,Ohlins shock,Thermosman front,KWS F3 engine,Bridgestone YCY slicks,HRC CDI,CFM rear sets,G'ridge kv lines

(in reply to horsboel)

Post #: 2

RE: 95 motor on a 93 chassi - 6/3/2008 6:40:33 AM

rk97

Posts: 72
Joined: 5/13/2008
Status: offline

that's awesome. You're so emphatic about it, I'd almost think you're selling F3 engines. ha.

(in reply to kjohnson)

Post #: 3

RE: 95 motor on a 93 chassi - 6/3/2008 7:52:05 PM

kjohnson

Posts: 536
Joined: 7/31/2007
Status: offline

Lookit my sig line.Did the "drop-in" myself and put it in motion.

_____________________________

Street:F2-Fox Twin Clicker,Thermosman Forks,G'ridge lines,NGK Iridiums,Two Bros pipe,F3 rear wheel,Bridgestone 002 pro
Race:F2/3-EBC rotor kit,Ohlins shock,Thermosman front,KWS F3 engine,Bridgestone YCY slicks,HRC CDI,CFM rear sets,G'ridge kv lines

(in reply to rk97)

Post #: 4

RE: 95 motor on a 93 chassi - 6/3/2008 8:12:42 PM

rk97

Posts: 72
Joined: 5/13/2008
Status: offline

I noticed that you'd done it. I'm hoping I won't ever need to attempt the swap, but it's nice to know it's a realatively simple option.

(in reply to kjohnson)

Post #: 5

RE: 95 motor on a 93 chassi - 6/16/2008 7:32:55 PM

benjiboy

Posts: 43
Joined: 12/13/2007
Status: offline

Does anyone know if the F3 oil pan will fit a F2 motor???

I''m picking up a 96 F3 motor minus the carbs for $100. I just need the oil pan off it but I don''t know if it will fit and if not I may just throw it all in there :)

(in reply to rk97)

Post #: 6

RE: 95 motor on a 93 chassi - 6/17/2008 7:18:09 PM

kjohnson

Posts: 536
Joined: 7/31/2007
Status: offline

I don''t think the pans are the same,but I don''t know if they are interchangeable.

Holla back and let us know

_____________________________

Street:F2-Fox Twin Clicker,Thermosman Forks,G'ridge lines,NGK Iridiums,Two Bros pipe,F3 rear wheel,Bridgestone 002 pro
Race:F2/3-EBC rotor kit,Ohlins shock,Thermosman front,KWS F3 engine,Bridgestone YCY slicks,HRC CDI,CFM rear sets,G'ridge kv lines

(in reply to benjiboy)

Post #: 7